Turbocharger
Show/hide table
Illustration 1 | g00288169 |
(1) Tighten the clamp bolts to the following torque. ... 14 ± 3 N·m (10 ± 2 lb ft)
Lightly hit the clamps with a soft faced hammer. Again tighten the clamp bolts to the following torque. ... 14 ± 3 N·m (10 ± 2 lb ft)
(2) Apply 5P-3931 Anti-Seize Compound on the threads of the studs. Tighten the nuts to the following torque. ... 55 ± 5 N·m (40 ± 4 lb ft)
(3) Waste gate
Show/hide table
Waste Gate Pressure     | |
Part Number     | Specification (For 1.0 mm Rod Travel)     |
124-3031 and 131-2427     | 132 ± 6 kPa (19 ± 1 psi)     |
124-3032     | 168 ± 6 kPa (24 ± 1 psi)     |
124-3033 and 127-4260     | 151 ± 6 kPa (22 ± 1 psi)     |
124-3034     | 139 ± 6 kPa (20 ± 1 psi)     |
124-3035     | 143 ± 6 kPa (21 ± 1 psi)     |
124-3759, 132-3651 and 130-6233     | 152 ± 6 kPa (22 ± 1 psi)     |
Caterpillar Information System:
3612 and 3616 Engines Air Starting Motor
3406C (PEEC III) Truck Engine Cylinder Liner
3612 and 3616 Engines Gear Group (Front)
3406C Engines for Caterpillar Built Machines Main Bearing Journal
3406C Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
3406E Truck Engine Piston and Rings
3406E Truck Engine Connecting Rod
Torque Specifications Installation of Fittings
Torque Specifications O-Ring Face Seal Fittings
3618 Engine Cylinder Liner
Torque Specifications Straight Thread O-Ring Fittings
3406E Truck Engine Engine Oil Filler
Torque Specifications Flare Fittings
Torque Specifications Air Conditioning Fittings
Torque Specifications Tapered Pipe Thread Fittings
G3612 and G3616 Engines Cylinder Liner
Torque Specifications Miscellaneous Fittings
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Speed/Timing Sensors - Check/Clean/Calibrate
3618 Engine Manual Valve Group (Cylinder Pressure)
G3612 and G3616 Engines Prelube Pump
3406E Truck Engine Housing (Front)
3612 and 3616 Engines Housing (Front)
3608 Engine Housing (Rear)
3612 and 3616 Engines Crankshaft