Crankshaft
Show/hide table
 | |
| 图 1 | g00288813 |
(1) 止推板的厚度 ... 13.80 ± 0.05 mm (0.543 ± 0.002 in)
将止推板安装到后部从动设备的后主轴承上。 将止推板安装到前部从动设备的前主轴承上。
带有新止推片的曲轴的端隙 ... 0.20 到 0.60 mm (0.008 到 0.024 in)
(2) 新连杆轴颈的直径 ... 216.000 ± 0.025 mm (8.5039 ± 0.0010 in)
(3) 新主轴承轴颈的直径 ... 250.000 ± 0.025 mm (9.8425 ± 0.0010 in)
Show/hide table
 | |
| 图 2 | g00288814 |
(4) 将曲轴塞拧紧至以下扭矩。 ... 300 ± 40 N·m (220 ± 30 lb ft)
Show/hide table
 | |
| 图 3 | g00288815 |
(5) 销从曲轴定时销支架伸出的距离如下。 ... 5.0 ± 1.0 mm (0.20 ± 0.04 in)
(6) 曲轴定时销支架
Caterpillar Information System:
3608 Engine Housing (Rear)
3612 and 3616 Engines Housing (Front)
3406E Truck Engine Housing (Front)
G3612 and G3616 Engines Prelube Pump
3618 Engine Manual Valve Group (Cylinder Pressure)
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Speed/Timing Sensors - Check/Clean/Calibrate
Torque Specifications Miscellaneous Fittings
G3612 and G3616 Engines Cylinder Liner
Torque Specifications Tapered Pipe Thread Fittings
Torque Specifications Air Conditioning Fittings
Torque Specifications Flare Fittings
3406E Truck Engine Turbocharger
3406E Truck Engine Exhaust Manifold Shield
3406E Truck Engine Accessory Drive (Air Compressor)
3408E and 3412E Engines for Caterpillar Built Machines Crankcase Breather
3406E Truck Engine Water Pump
3618 Engine Engine Oil Pump
3618 Engine Camshaft Bearings
3406C (PEEC III) Truck Engine Flywheel Housing
G3612 and G3616 Engines Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
3406E Generator Set Engines Electrical System
3406E Truck Engine BrakeSaver Control Valve
3406E Truck Engine BrakeSaver
3406C (PEEC III) Truck Engine Engine Oil Cooler Bypass Valve