Engine Oil Pan - Remove
拆卸步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 将发动机机油排入合适的容器以便保存或废弃。 参考操作和保养手册, "容量（加注）"，了解机油容量。
- 拆卸固定机油泵接头和油底壳的螺栓 (1) 。
Show/hide table
 | |
| 图 1 | g00921655 |
典型示例 | |
- 拆卸连接油底壳和发动机的螺栓 (2) 。
Show/hide table
 | |
| 图 2 | g00921656 |
典型示例 | |
Show/hide table
 | |
| 图 3 | g00604419 |
典型示例 | |
- 将适当起吊设备连在发动机吊耳上。
- 3508 发动机的重量约为 4445 kg (9800 lb)。 油底壳的重量约为 240 kg (530 lb)。
- 3512 发动机的重量约为 5900 kg (13,000 lb)。 油底壳的重量约为 295 kg (650 lb)。
- 3516 发动机的重量约为 7711 kg (17,000 lb)。 油底壳的重量约为 409 kg (900 lb)。
- 3508 发动机的重量约为 4445 kg (9800 lb)。 油底壳的重量约为 240 kg (530 lb)。
Show/hide table
 |
不适当的吊具会使被吊装设备翻倒，造成伤害和损坏。 |
注: 如果使用了不适当的设备来起吊发动机，可能发生人身伤害和设备损坏。 使用合适额定承重力的钢索或链条。 使用平压机并根据发动机起吊贴膜上的信息连接钢索或链条。
Show/hide table
 | |
| 图 4 | g00604420 |
典型示例 | |
- 从油底壳提升发动机。
- 拆卸密封垫 (3) 和 O 形密封圈 (4) 。
Show/hide table
 | |
| 图 5 | g00604494 |
典型示例 | |
Caterpillar Information System:
3524B Engine for Caterpillar Built Machines Engine Oil and Water Pump Drive - Install
2002/09/16 Air Fuel Ratio Control Valve Diaphragm Available for Service on Lucas Fuel Injection Pumps {1278}
2002/09/16 Operation and Maintenance Manual, SEBU6250, "Caterpillar Machine Fluid Recommendations" has been Revised {1000, 1250, 1300, 1350, 7000, 7581}
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Drag Conveyor System
3508 and 3516 EUI Engines and 5130 and 5230 Excavators Engine Oil Pan
TK711, TK721, TK722 and TK732 Track Feller Bunchers Towing the Machine
14H Motor Grader 3176C Engine Supplement Engine - Install
3524B Engine for Caterpillar Built Machines Engine Oil and Water Pump Drive - Assemble
14H Motor Grader 3176C Engine Supplement Engine - Remove
CD54 Paving Compactor Operator Platform - Lubricate
120H and 135H Motor Graders Machine Systems Bank Valve - Disassemble - Bank Valve with out Detent
AP-655C and BG-2255C Asphalt Pavers Attachments Control Valve (Generator) - 8 kW
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pan - Disassemble
R2900 Load Haul Dump Automatic Lubrication Grease Tank - Fill - Hydraulic Type - If Equipped
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Rotor Drive Planetary - Disassemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pan - Assemble
R2900 Load Haul Dump Automatic Lubrication Filler Filter - Clean - Hydraulic Type - If Equipped
C9 Engines for Caterpillar Built Machines Engine Design
R2900 Load Haul Dump Automatic Lubrication Inline Filter - Clean - Hydraulic Type - If Equipped
D350E Series II and D400E Series II Articulated Trucks Power Train Solenoid and Relief Valve (Output Transfer Gears)
D250E Series II and D300E Series II Articulated Trucks Power Train Solenoid and Relief Valve (Output Transfer Gears)
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pan - Install
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers Power Train Hydraulic Schematic (Power Train System)
TK711, TK721, TK722 and TK732 Track Feller Bunchers Access Door and Cover Locations