Solenoid and Relief Valve (Output Transfer Gears)
Show/hide table
 | |
| Illustration 1 | g00921723 |
(1) Solenoid Valve
- Torque for final installation ... 25 ± 5 N·m (18.0 ± 4.0 lb ft)
- Torque for nut (2) ... 9.0 ± 0.5 N·m (80.0 ± 4.0 lb in)
- Operating temperature range ... -40 to 121 °C (-40.0 to 250.0°F)
- Flow rate with SAE10W hydraulic oil with a drop of 400 kPa (58.0 psi) at 70 °C (158.0 °F) ... 21 L/min (5.6 US gpm)
- Nominal voltage ... 24 VDC
- Minimal voltage for actuation at 25 °C (77.0 °F) with a drop of 2758 kPa (400.0 psi) ... 18 VDC
- Maximum voltage at 25 °C (77.0 °F) ... 28.5 VDC
- Minimum current for actuation with a drop of 24138 kPa (3500.0 psi) ... 0.45 Amperes
- Resistance at a temperature of 25° ± 5°C (77.0° ± 9.0°F) ... 32.6 ± 1.6 Ohms
- Torque for nut (2) ... 9.0 ± 0.5 N·m (80.0 ± 4.0 lb in)
Caterpillar Information System:
D350E Series II and D400E Series II Articulated Trucks Power Train Solenoid and Relief Valve (Output Transfer Gears)
R2900 Load Haul Dump Automatic Lubrication Inline Filter - Clean - Hydraulic Type - If Equipped
C9 Engines for Caterpillar Built Machines Engine Design
R2900 Load Haul Dump Automatic Lubrication Filler Filter - Clean - Hydraulic Type - If Equipped
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pan - Assemble
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Rotor Drive Planetary - Disassemble
R2900 Load Haul Dump Automatic Lubrication Grease Tank - Fill - Hydraulic Type - If Equipped
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pan - Disassemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pan - Remove
3524B Engine for Caterpillar Built Machines Engine Oil and Water Pump Drive - Install
2002/09/16 Air Fuel Ratio Control Valve Diaphragm Available for Service on Lucas Fuel Injection Pumps {1278}
2002/09/16 Operation and Maintenance Manual, SEBU6250, "Caterpillar Machine Fluid Recommendations" has been Revised {1000, 1250, 1300, 1350, 7000, 7581}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pan - Install
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers Power Train Hydraulic Schematic (Power Train System)
TK711, TK721, TK722 and TK732 Track Feller Bunchers Access Door and Cover Locations
120H and 135H Motor Graders Machine Systems Bank Valve - Assemble - Bank Valve with Hydraulic Detent
CB-534D and CB-564D Asphalt Compactors Offset Cylinder Ends - Lubricate - If Equipped
R2900 Load Haul Dump Backup Alarm - Test
TK711, TK721, TK722 and TK732 Track Feller Bunchers Lubricant Viscosities
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Turbocharger
3508 and 3516 EUI Engines and 5130 and 5230 Excavators Radiator
TK711, TK721, TK722 and TK732 Track Feller Bunchers Capacities (Refill)
TK711, TK721, TK722 and TK732 Track Feller Bunchers Air Conditioner/Cab Heater Filter (Recirculation) - Inspect/Replace
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Scavenge Pump - Remove