Cylinder Head - Inspect
Show/hide table
Required Tools | ||
---|---|---|
Part Number | Part Name | Qty |
8S-6691 | Cylinder Head Stand Set | 1 |
Show/hide table
Illustration 1 | g01112400 |
Bolt tightening sequence for the C0.5, engine |
Show/hide table
Illustration 2 | g00907442 |
Bolt tightening sequence for the C0.7, C1.1/3011C, and C1.5/3013C engines |
Show/hide table
Illustration 3 | g00907444 |
Bolt tightening sequence for the C1.6, C2.2/3024C and C2.2/3024CT engine |
- Remove the bolts in the cylinder head in the reverse sequence that is shown in Illustrations 1, 2 and 3.
Remove the cylinder head from the engine.
- Clean the cylinder head thoroughly. Make sure that the contact surface of the cylinder head and the contact surface of the cylinder block are clean, smooth, and flat.
- Inspect the bottom surface of the cylinder head for pitting, corrosion, and cracks. Inspect the area around the valve seats and the holes for the fuel injection nozzles.
Show/hide table
Illustration 4 g00842292 Typical example - Put cylinder head (1) on the 8S-6691 Cylinder Head Stand Set (2).
Show/hide table
Illustration 5 g00907448 Typical example - Use a straight edge and a feeler gauge to check the six positions of the cylinder head for distortion. Refer to Specifications, "Cylinder Head" for the requirements of flatness.
Caterpillar Information System:
CB-634D Paving Compactor Fuel System Water Separator - Drain
140H and 160H Motor Graders Electronic Unit Injector - Inspect/Adjust
CB-634D Paving Compactor Fuel System Secondary Filter - Replace
14H Motor Grader Ether Starting Aid Cylinder - Replace
416D Backhoe Loader Backhoe Stabilizer Controls
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Pressure - Test
CB-634D Paving Compactor Fuel System - Prime
CB-634D Vibratory Compactor Machine Systems Battery and Battery Cable - Separate and Connect
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Using the Diagnostic Indicator to Determine Diagnostic Codes
CB-634D Vibratory Compactor Machine Systems Hydraulic System Pressure - Release
CB-634D Paving Compactor Engine Water Pump - Inspect
16H Motor Grader Engine Oil and Filter - Change
CB-634D Paving Compactor Fuel Tank Cap and Strainer - Clean
16H Motor Grader Drawbar Ball and Socket End Play - Check/Adjust
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Machine Preheater - Remove and Install
CB-634D Paving Compactor Fuel Tank Water and Sediment - Drain
2002/01/14 A New Linkage Design is Being Used {3209, 5070}
16H Motor Grader Fuel System - Prime
CB-634D Paving Compactor Hydraulic System Oil - Change
550, 570 and 580 Wheel Harvesters Tire Information
16H Motor Grader Fuel System Secondary Filter - Replace
16H Motor Grader Fuel System Water Separator - Drain
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Refrigerant Condenser - Remove and Install
CB-634D Vibratory Compactor Machine Systems Water Spray Pump - Remove