Axle (without Brakes) - Assemble
组装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
B     | 1P-1859     | 挡圈钳     | 1     |
C     | 1P-0510     | 冲头总成     | 1     |
E     | 138-7573     | 连杆支架     | 2     |
F     | 1U-8846     | 密封垫密封胶     | 1     |
G     | 155-0695     | 螺纹锁固胶     | 1     |
H     | 069-4707     | 密封胶     | 1     |
- 检查并清洗所有零件。 如果任何零件磨损或损坏,则应使用 Caterpillar 新件进行更换。
- 检查所有密封件。 必须更换损坏的密封件。 用新的 Caterpillar 密封件进行更换。
- 清洁差速器和伞齿轮与车桥壳体的两个配合面。
Show/hide table
图 1 | g01066510 |
- 将一薄层连续的工具 (F) 涂覆到车桥壳体上。
- 使用工具 (E) 和适当的起吊设备安装差速器和伞齿轮 (34) 。 差速器和伞齿轮的重量约为 28 kg (62 lb)。 拆下工具 (E) 。
- 安装螺栓 (35) 。 将螺栓 (35) 拧紧至扭矩为 169 N·m (125 lb ft)。
Show/hide table
图 2 | g01061635 |
Show/hide table
图 3 | g01066506 |
- 使用工具 (C) 和适当的压具将密封件 (33) 安装到壳体 (32) 中。 将盖 (32) 安装到差速器和伞齿轮 (34) 上。
- 将右侧轴组件 (31) 安装到车桥中。
Show/hide table
图 4 | g01061633 |
- 将左侧轴组件 (30) 安装到车桥中。
Show/hide table
图 5 | g01061632 |
- 将轴承外圈 (29) 冷却至 −51 °C (−60 °F)。 将轴承外圈安装到毂 (25) 中。
Show/hide table
图 6 | g01061629 |
- 将唇形密封 (28) 安装到毂 (25) 中。
- 安装轴承内圈 (27) 、毂 (25) 和轴承内圈 (26) 。
Show/hide table
图 7 | g01061625 |
Show/hide table
图 8 | g01061619 |
- 使用合适的压具,将衬套 (24) 安装到齿圈 (23) 中。
Show/hide table
图 9 | g01064990 |
- 安装新螺栓 (22) 。 将螺栓 (22) 拧紧至扭矩为 230 N·m (170 lb ft)。
Show/hide table
图 10 | g01064656 |
- 安装轴 (21) 。
- 将 O 形密封圈 (20) 安装到齿圈 (22) 上。
- 安装 84 个滚针轴承、齿轮 (19) 、垫圈 (18) 和螺栓 (17) 。
Show/hide table
图 11 | g00847471 |
- 安装端盖 (16) 和螺钉 (15) 。
Show/hide table
图 12 | g00847469 |
- 向轮毂注油。 轮毂的容量约为 1.3 L (0.3 US gal)。 有关正确的步骤,请参阅操作和保养手册。
- 重复步骤 10 至 19,以组装其他轮毂。
- 将工具 (H) 涂覆到车桥壳体上。 安装盖 (14) 。 将工具 (G) 涂覆到螺栓 (13) 上,然后安装螺栓。 拧紧螺栓至扭矩为 120 N·m (89 lb ft)。
Show/hide table
图 13 | g00847468 |
- 使用合适的压具,将轴承 (12) 安装到齿轮 (6) 上。 使用工具 (B) ,安装挡圈 (11) 。
Show/hide table
图 14 | g00847467 |
- 使用合适的压具,将轴承 (10) 安装到齿轮 (6) 上。
Show/hide table
图 15 | g00847466 |
- 使用合适的压具,将轴承 (9) 安装到齿轮 (7) 上。
Show/hide table
图 16 | g00847465 |
- 使用合适的压具,将轴承 (8) 安装到齿轮 (7) 上。
Show/hide table
图 17 | g00847464 |
- 安装齿轮 (7) 和齿轮 (6) 。
Show/hide table
图 18 | g00847463 |
- 将定位销 (6) 安装到盖 (5) 上。 将工具 (H) 涂覆到盖 (5) 上。
Show/hide table
图 19 | g00847462 |
- 安装盖 (5) 和螺栓 (4) 。 将螺栓拧紧至扭矩 60 N·m (44 lb ft)。
Show/hide table
图 20 | g00847461 |
- 将 O 形密封圈 (3) 安装在盖 (2) 上。
Show/hide table
图 21 | g00847460 |
- 安装盖 (2) 和螺栓 (1) 。 将螺栓拧紧至扭矩 60 N·m (44 lb ft)。
Show/hide table
图 22 | g00847459 |
- 将螺栓和盖从齿轮箱上拆下。 将推进马达和螺栓安装到齿轮箱上。
- 向齿轮箱注油。 齿轮箱的容量为 1.2 L (0.3 US gal)。
- 向差速器注油。 差速器的容量为 9 L (2.4 US gal)。
End By: 安装车桥。 请参阅 拆解和组装, "轮轴 - 安装"。
Caterpillar Information System:
CP-433E, CS-423E and CS433E Vibratory Soil Compactors Machine Systems Padded Drum Scraper - Scraper on Shell Kit Attachment
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Power Train Rim Group
CB-634D Paving Compactor Engine Governor Oil Supply Screen - Clean/Inspect/Replace
CB-634D Paving Compactor Engine Crankcase Breather - Clean
533 and 543 Wheel Feller Bunchers Water Cleaning System (Pressurized) - Purge
533 and 543 Wheel Feller Bunchers Water Cleaning System (Pressurized) - Test
14H Motor Grader Drawbar Ball and Socket - Lubricate
16H Motor Grader Crankshaft Vibration Damper - Inspect
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Hood - Remove and Install
14H Motor Grader Condenser (Refrigerant) - Clean
CB-634D Paving Compactor Engine Air Filter Service Indicator - Inspect
14H Motor Grader Circle Top - Lubricate
PM-465 Cold Planer Reference Material
CP-433E, CS-423E and CS433E Vibratory Soil Compactors Machine Systems Padded Drum Scraper - Flexible Scrapers
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Design
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Service Tools
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Initial Pressures - Test and Adjust
CB-634D Paving Compactor Engine Mounts - Inspect
CB-634D Paving Compactor Engine Oil Level - Check
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Tilt) (Mechanically Operated) - Single Tilt Machines
CB-634D Paving Compactor Engine Oil Sample - Obtain
CP-433E, CS-423E and CS-433E Paving Compactors Platform Tilting
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Diagnostic Capabilities
16H Motor Grader Engine Oil Level - Check