3408E and 3412E Engines for Caterpillar Built Machines Caterpillar


Air Compressor Drive Gear - Install

Usage:

769C 01X

安装步骤

表 1
所需工具 
工具  零件号  零件说明  数量 
A  1U-8792  链式扳手 


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 1g00835609

  1. 将键安装到空气压缩机的驱动轴 (1) 上。

  2. 将密封垫 (5) 和过渡接头 (6) 安装到空气压缩机上。

  3. 将驱动齿轮 (2) 内的键槽与驱动轴 (1) 内的键对齐。 将齿轮 (2) 安装到驱动轴 (1) 上。


    图 2g00835629

  4. 将隔套 (3) 和螺母 (4) 安装到驱动轴上。 将工具 (A) 卡到驱动齿轮上并将螺母 (4) 上紧到驱动轴上。 将 O 形密封圈 (7) 安装到过渡接头上。

结束:

  1. 安装空气压缩机。 请参阅 , "空气压缩机 - 拆卸和安装"。

Caterpillar Information System:

416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Gear Motor (Hydraulic Fan)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
3408E and 3412E Engines for Caterpillar Built Machines Air Compressor Drive Gear - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Axle) Oil Sample - Obtain
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Axle) Oil Level - Check
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Axle) Oil - Change
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Five)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
735 Articulated Truck Power Train Center Axle - Remove
416D Backhoe Loader Lubricant Viscosities
2001/10/22 Correction to Specification, System Operation, Testing and Adjusting Module , "Final Drive Reducer" {4050}
416D Backhoe Loader Backhoe Stabilizer Controls
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Relay (Parking Brake)
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Piston Pump (Vibratory) - Disassemble
TH210 and TH215 Telehandlers Steering System Gear Pump (Hydraulic and Steering)
AS2251 Screed Forces Affecting Mat Thickness
AS2251 Screed Plate Locations and Film Locations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.