Air Compressor Drive Gear - Remove
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1U-8792 | 链式扳手 | 1 |
| B | 1P-2321 | 组合式拉拔器 | 1 |
| B | FT-0884 | 拉拔器腿 | 3 |
| B | 1P-0510 | 冲头总成 | 1 |
开始:
- 拆卸空气压缩机。 请参阅拆解和组装, "空气压缩机 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 将工具 (A) 固定驱动齿轮，并将螺母 (4) 从空气压缩机的驱动轴上拆下。
- 将 O 形密封圈 (2) 从适配器 (1) 上拆下。
Show/hide table
图 2 g00835602 - 利用工具 (B) 将驱动齿轮 (5) 从空气压缩机的驱动轴上拆下。 从轴上卸下键。
- 拆下适配器和密封垫 (6)。
Show/hide table
| |
| 图 1 | g00835580 |
Caterpillar Information System:
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Axle) Oil Sample - Obtain
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Axle) Oil Level - Check
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Axle) Oil - Change
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Five)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Five)(Pilot Operated)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Five)(Pilot Operated)
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Manual Operation of Secondary Steering
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Five)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Five)(Mechanically Operated)
3408E and 3412E Engines for Caterpillar Built Machines Air Compressor - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Gear Motor (Hydraulic Fan)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
3408E and 3412E Engines for Caterpillar Built Machines Air Compressor Drive Gear - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
735 Articulated Truck Power Train Center Axle - Remove
416D Backhoe Loader Lubricant Viscosities
2001/10/22 Correction to Specification, System Operation, Testing and Adjusting Module , "Final Drive Reducer" {4050}