Bank Valve (Six)(Mechanically Operated)
Show/hide table
Illustration 1 | g00737806 |
185-5905 Bank Valve (Six) |
(1) Extendable stick control valve
(2) Stick control valve
(3) Bucket control valve
(4) Swing control valve
(5) Boom control valve
(6) Work tool control valve
(7) Inlet
- Torque for the nuts ... 27.0 ± 3.0 N·m (20.00 ± 2.00 lb ft)
(8) Outlet
(9) Solenoid valve for the side shift lock circuit
- Torque for nut (10) ... 5.5 ± 1.5 N·m (4.00 ± 1.00 lb ft)
- Torque for the solenoid ... 50.0 ± 5.0 N·m (37.00 ± 3.00 lb ft)
- Nominal voltage for the coil ... 12 VDC
- Maximum voltage ... 14.5 VDC
- Resistance at a temperature of 25.0° ± 5.0°C (77.00° ± 9.00°F) ... 10.5 Ohms
- Torque for the solenoid ... 50.0 ± 5.0 N·m (37.00 ± 3.00 lb ft)
(11) Torque for the nuts ... 27.0 ± 3.0 N·m (20.00 ± 2.00 lb ft)
Note: Place three 4T-2723 Shims between the valve sections during assembly. Place one shim over each stud. The shims are necessary in order to prevent the spool from binding in the valve body.
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Air Compressor Drive Gear - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Axle) Oil Sample - Obtain
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Axle) Oil Level - Check
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Axle) Oil - Change
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Five)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Five)(Pilot Operated)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Five)(Pilot Operated)
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Manual Operation of Secondary Steering
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Five)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Five)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Gear Motor (Hydraulic Fan)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
3408E and 3412E Engines for Caterpillar Built Machines Air Compressor Drive Gear - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
735 Articulated Truck Power Train Center Axle - Remove
416D Backhoe Loader Lubricant Viscosities
2001/10/22 Correction to Specification, System Operation, Testing and Adjusting Module , "Final Drive Reducer" {4050}
416D Backhoe Loader Backhoe Stabilizer Controls