Service Brake Discs - Check
- Stop the engine. Prepare the machine for servicing. Refer to the Operation and Maintenance manual for your machine.
- Place wheel blocks in front of the rear wheels and behind the rear wheels.
- Use a 208-5524 Brake Wear Gauge in order to measure the brake discs for minimum thickness.
- Remove oil filler plug (1) .
Show/hide table
Illustration 1 | g00787712 |
Top view of the Front Axle |
- Compress and hold the brake pack by engaging the brakes.
- Measure the thickness of a brake disc (2) by inserting the 208-5524 Brake Wear Gauge through the oil filler plug hole (3) and between the plates of the compressed brake pack. Refer to Illustration 2.
The minimum allowable thickness (S) is 3.350 mm (0.1319 inch).
Show/hide table
Illustration 2 | g00787713 |
- Disengage the brakes.
- Reinstall the oil filler plug.
- Repeat Steps 5 through 9 in order to check the thickness of the brake discs at the opposite side of the differential for the front axle.
Note: Repeat this procedure as often as needed in order to maintain the correct thickness of the brake discs.
- Remove the wheel blocks.
- Prepare the machine for operation.
Caterpillar Information System:
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Gear Pump (Hoist) - Test
TH103 Telehandler Braking System Visual Inspection
2001/04/09 Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
PF-300B and PS-300B Pneumatic Compactors Seat
725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System System Schematic
Product Identification Numbers (PIN) Location Guide Knuckle Boom Loader
PF-300B and PS-300B Pneumatic Compactors Sound Information and Vibration Information
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Articulation Cylinder Mounting
725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System Connector Contact Description of Main Display Module
120H and 135H Motor Graders Hydraulic and Steering System Steering Cylinder
533 and 543 Wheel Feller Bunchers Seat
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Brake Discs - Check
TK1051 Track Feller Buncher Machine System Oil Filter (Return)
533 and 543 Wheel Feller Bunchers Hydraulic System Oil Level - Check
TK1051 Track Feller Buncher Machine Systems Cycle Times - Test and Adjust
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Filling and Flushing the Hydraulic System - Test
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Hydraulic Oil Contamination - Test
533 and 543 Wheel Feller Bunchers Reference Material
216 and 226 Skid Steer Loaders Machine Systems Hydraulic System Pressure - Release
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Tilt Cylinder - Install
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Hydraulic System Troubleshooting
216 and 226 Skid Steer Loaders Machine Systems Hydrostatic System Troubleshooting
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Hydrostatic System - Test and Adjust
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Line Relief Valve - Test and Adjust