950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Caterpillar


Hydraulic Tank

Usage:

950G 2JS



Illustration 1g00760234

(1) Length of 3G-4090 RTV Silicone Sealant ... 2500 ± 30 mm (98.4250 ± 1.1811 inch)

Note: Overlap the ends of the sealant in order to complete the seal.

(2) Torque for the two bolts ... 30 ± 7 N·m (22 ± 5 lb ft)

(3) Pressure setting for the air pressure test through the port of the hydraulic oil temperature sender ... 150 ± 35 kPa (22 ± 5 psi)

(4) Torque for the two locknuts ... 30 ± 7 N·m (22 ± 5 lb ft)

(5) 7B-3039 Spring

Length under test force ... 26.1 mm (1.03 inch)
Test force ... 15.6 ± 1.2 N (3.51 ± .27 lb)
Free length after test ... 36.5 mm (1.44 inch)
Outside diameter ... 19.8 mm (.78 inch)

(6) Torque for the drain plug ... 68 ± 7 N·m (50 ± 5 lb ft)

Caterpillar Information System:

Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Transverse Beam - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Boom Cylinder - Assemble
C11 and C13 Engines for Caterpillar Built Machines CID 0091 FMI 08 Throttle Position signal abnormal
216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Quick Coupler - Inspect
247, 257, 267, 277 and 287 Multi Terrain Loaders Lift Arm and Cylinder Linkage - Lubricate
247, 257, 267, 277 and 287 Multi Terrain Loaders Hydraulic System Oil - Change
2001/04/09 Ordering The VIMSpc99 Off-Board Software {7601}
735 Articulated Truck Hoist System and Brake System Oil - Change
735 Articulated Truck Hoist System and Brake System Strainer - Clean
735 Articulated Truck Hoist System and Brake System Oil Level - Check
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Bank Valve (Loader) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Bank Valve (Loader) - Remove
TL2 Series In-Line Rippers General Information
2001/04/16 Delayed Release of Parking Brake {4267}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0164 FMI 11 Injector Actuation Pressure system fault
AS2301 Front Mounted Screed Hydraulic Cylinder (Extender Extend)
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Pilot Operated Hydraulic Control
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Swing Cylinder - Disassemble
AS2301 Front Mounted Screed Hydraulic Cylinder (Extender Slope)
143H and 163H Motor Graders All Wheel Drive Pump Control (All Wheel Drive)
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Engine Oil Cooler - Remove
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Engine Oil Cooler - Install
2001/04/23 Correction to Disassembly and Assembly, SENR2971 {3258}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Front Wheel Drive Manifold - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.