Specifications for the Pilot Operated Hydraulic Controls ( Hydrostatic)
Illustration 1 | g00859338 |
(1) Orient the 110-8760 Strap in the position that is shown. Tighten the strap securely around the bottom of the boot.
(2) Torque for the two 8T-4908 Bolts ... 18 ± 1.5 N·m (13 ± 1 lb ft)
(3) Apply 155-0695 Locktite to the threads before assembly. Torque for the nut ... 40 ± 5 N·m (30 ± 3 lb ft)
(4) Apply 155-0695 Locktite to the threads before assembly. Tighten the rod to the full depth of the threads. Back out the rod to the orientation that is shown.
(5) Apply 155-0695 Locktite to the threads before assembly. Torque for the nut 095-1207 Nut ... 40 ± 5 N·m (30 ± 3 lb ft)
(6) Hold the cam to a plunger. On the opposite side of the cam, a gap develops between the cam and the plunger. The distance between the cam and plunger ... 0.10 ± 0.10 mm (0.004 ± 0.004 inch)
(7) Torque for the 191-0916 Solenoid Valve ... 50 ± 5 N·m (37 ± 4 lb ft)
(8) Torque for the 156-5970 Nut ... 9.5 ± 1.5 N·m (7 ± 1 lb ft)
Illustration 2 | g00859430 |
Electric horn and Auxiliary |
(9) Torque for the 159-9495 Nut (if equipped) ... 30.25 ± 1.25 N·m (22 ± 1 lb ft)
(10) As needed, attach 142-9333 Harness (if equipped) to the hydraulic tubes with 3S-2093 Cable Straps.
(A) Position for the 164-9425 Electric Horn (if equipped) ... 30 degrees
The specifications that are listed above are applicable to the following pilot operated hydraulic controls ( hydrostatic).
Part Number     | Pilot Operated Hydraulic Controls ( Hydrostatic)     |
191-2907     | Standard Control     |
191-2908     | Control that is equipped with a Horn button     |
191-2909     | Control that is equipped with a Horn button and Fourth Function     |
191-9683     | Control that is equipped with a Horn button, Fourth Function, and Two Speed Control     |
191-9746     | Control that is equipped with a Horn button and Fourth Function     |
191-9797     | Control that is equipped with a Horn button, Fourth Function, and Two Speed Control     |
215-3944     | Control that is equipped with a Horn button, Fourth Function, and Two Speed Control     |
215-3946     | Control that is equipped with a Horn button and Fourth Function     |
Specifications for the Pilot Operated Hydraulic Controls ( Work Tool)
Illustration 3 | g00859339 |
(1) Orient the 110-8760 Strap in the position that is shown. Tighten the strap securely around the bottom of the boot.
(2) Torque for the two 8T-4908 Bolts ... 18 ± 1.5 N·m (13 ± 1 lb ft)
(3) Apply 155-0695 Locktite to the threads before assembly. Torque for the Nut ... 40 ± 5 N·m (30 ± 3 lb ft)
(4) Tighten the rod to the full depth of the threads. Back out the rod to the orientation that is shown.
(5) Apply 155-0695 Locktite to the threads before assembly. Torque for the nut ... 40 ± 5 N·m (30 ± 3 lb ft)
(6) Torque for the 191-0916 Solenoid Valve ... 50 ± 5 N·m (37 ± 4 lb ft)
(7) Torque for the 156-5970 Nut ... 9.5 ± 1.5 N·m (7 ± 1 lb ft)
The specifications that are listed above are applicable to the following pilot operated hydraulic controls ( work tool).
Part Number     | Pilot Operated Hydraulic Controls ( Work Tool)     |
190-8095     | ON/OFF Auxiliary Control     |
190-8080     | Proportional Auxiliary Control     |