Steering Clutches and Brakes
Show/hide table
 | |
| Illustration 1 | g00762361 |
(1) Thickness of four new friction discs and five new plates for brake (standard and LGP) ... 30.350 ± 1.095 mm (1.195 ± 0.043 inch)
(1) Thickness of one new 101-5144 Friction Disc ... 4.700 ± 0.018 mm (0.185 ± 0.007 inch)
(1) Thickness of one new 6Y-5692 Plate ... 2.310 ± 0.018 mm (0.091 ± 0.003 inch)
(2) Thickness of six new friction discs and seven new plates for steering clutch (standard and LGP) ... 44.37 ± 1.61 mm (1.747 ± 0.063 inch)
(2) Thickness of one new 101-5141 Friction Disc ... 4.700 ± 0.018 mm (0.185 ± 0.007 inch)
(2) Thickness of one new 8G-4510 Plate ... 2.310 ± 0.018 mm (0.091 ± 0.003 inch)
(3) 175-1834 Spring
Show/hide table
 | |
| Illustration 2 | g00102901 |
Position for assembly of spring (3) | |
Caterpillar Information System:
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 1227 - FMI 02
HF181, HF201 and HF221 Felling Heads Holding System
HF181, HF201 and HF221 Felling Heads Cutoff System
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Piston Pump (Auxiliary) - Assemble
2000/12/18 Correction to the Installation Procedure for the Fixed Axle Disassembly and Assembly Manual, SENR6768 {3278}
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 1100 - FMI 06
2000/12/25 The Oil Seals Have Been Removed From The Exhaust Valves {1100}
RM-250C Reclaimer Mixer Propel System Load Controller - Test and Adjust
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 1100 - FMI 05
RM-250C Reclaimer Mixer Propel System Piston Pump Neutral - Test and Adjust
725 and 730 Articulated Trucks Power Train Retarder - Test
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 1100 - FMI 03
HF181, HF201 and HF221 Felling Heads Tilt System
Installation of an Hydraulic Hand Control Conversion (Kit-Excavator Two Lever) for a Backhoe Loader{5063} Installation of an Hydraulic Hand Control Conversion (Kit-Excavator Two Lever) for a Backhoe Loader{5063}
2001/01/08 The New Version of Diagnostic Software for the LDS 3000 is Available {7620}
725 and 730 Articulated Trucks Machine Systems Secondary Steering Pump and Electric Motor - Remove
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hydraulic Accumulator (Suspension) - Test and Charge
HF181 Felling Head, HF201 Felling Head and HF221 Felling Head for Track Feller Bunchers Output Shaft - Install
3054 Engine Flywheel Housing - Inspect
HF181, HF201 and HF221 Felling Heads General Information
3054 Engine Flywheel - Inspect
Installation Procedure for Improved Chain Tensioner{6327} Installation Procedure for Improved Chain Tensioner{6327}
3054 Engine Alternator - Test
725 and 730 Articulated Trucks Power Train Transmission Planetary Troubleshooting