Parking Brake Air - Purge
The parking brake is self-purging. No bleed fitting is provided for the release of air in the lines.
When any parking brake component has been disassembled, block the wheels of the machine. Engage and disengage the parking brakes ten times in order to ensure that the air is purged from the lines.
Caterpillar Information System:
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Lift Arms - Remove
2000/12/25 Correction to the Special Instruction for the Installation of the Bevel Gear, Differential and the Differential Case {3256, 3258}
725 and 730 Articulated Trucks Power Train Interaxle Differential
725 and 730 Articulated Trucks Power Train Transmission Planetary
725 and 730 Articulated Trucks Power Train Oil Filter (Transmission)
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0709 - FMI 03
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0704 - FMI 04
797B Off-Highway Truck Power Train Rear Axle and Final Drive Hydraulic System
3176C Engine for Caterpillar Built Machines Ether Injection System - Test
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0704 - FMI 03
C-15 and C-16 Industrial Engines Fuel Transfer Pump
2000/12/18 A New Schematic for the Hydraulic System is Available {5050}
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors Low Power/Poor or No Response to Throttle
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors Poor Acceleration or Response
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0709 - FMI 05
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Check Valve (Axle Oil Cooler Bypass)
3126B Engine for Caterpillar Built Machines Diagnostic Codes
424D, 428D and 438D Backhoe Loaders Boom Transport Lock
3126B Engine for Caterpillar Built Machines CID 0041 FMI 03 8 Volt DC Supply short to +batt
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0709 - FMI 06
3406E Engine for Caterpillar Built Machines CID 0041 FMI 04 8 Volt DC Supply short to ground
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0724 - FMI 03
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors CID 0264 FMI 08 Decel Throttle Position signal abnormal
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Lift Arms - Install