Illustration 1 | g00758881 |
130-6520 Control Valve (Lift) |
(1) Torque for the two bolts ... 8.0 ± 1.5 N·m (72.00 ± 13.00 lb in)
(2) Torque that is needed to install the coupling to the spool ... 8.0 ± 1.5 N·m (72.00 ± 13.00 lb in)
Apply 4C-4030 Thread Lock Compound to the threads.
(3) 100-3564 Spring
- Length under test force ... 26.4 mm (1.04 inch)
- Test force ... 105.0 N (23.60 lb)
- Free length after test ... 28.7 mm (1.13 inch)
- Outside diameter ... 9.1 mm (0.36 inches)
- Test force ... 105.0 N (23.60 lb)
(4) Torque that is needed to install the plug ... 70.0 ± 7.0 N·m (50.00 ± 5.00 lb ft)
(5) Torque for the two bolts ... 5.5 ± 1.5 N·m (49.00 ± 13.00 lb in)
(6) Torque that is needed to install the plug ... 70.0 ± 7.0 N·m (50.00 ± 5.00 lb ft)
(7) 6E-4317 Spring
- Length under test force ... 47.8 mm (1.88 inch)
- Test force ... 38.0 N (8.60 lb)
- Free length after test ... 50.3 mm (1.98 inch)
- Outside diameter ... 14.2 mm (0.56 inches)
- Test force ... 38.0 N (8.60 lb)
(8) 4T-4513 Spring
- Length under test force ... 35.1 mm (1.38 inch)
- Test force ... 95.0 N (21.00 lb)
- Free length after test ... 63.5 mm (2.50 inch)
- Outside diameter ... 27.7 mm (1.09 inches)
- Test force ... 95.0 N (21.00 lb)
(9) Torque that is needed to install the housing ... 14.0 ± 2.0 N·m (10.00 ± 1.00 lb ft)
(10) Torque that is needed to install the shuttle seat assembly ... 14.0 ± 2.0 N·m (10.00 ± 1.00 lb ft)
(11) Depth that is required to drive the ball below the sleeve ... 0.406 mm (0.0160 inch)