Bucket Positioner Control - Remove and Install
拆卸步骤
开始:
- 释放液压系统压力。 请参阅拆解和组装, "液压系统压力 - 释放"。
注: 为便于安装,在所有管路、软管、导线和管子上做出识别标记。 插接所有管路、软管和管子。 这将有助于防止液体泄漏和防止污染物进入系统。
- 切断电缆扎带 (2) 并断开线束组件 (1) 。
Show/hide table
图 1 | g00758636 |
- 拆下卡箍 (3) 和控制总成 (4) 。
Show/hide table
图 2 | g00758638 |
- 拆下螺栓 (5) 和磁铁 (6) 。
Show/hide table
图 3 | g00758639 |
安装步骤
- 使用螺栓 (5) 安装磁铁 (6) 。
Show/hide table
图 4 | g00758639 |
- 使用卡箍 (3) 安装控制总成 (4) 。
Show/hide table
图 5 | g00758675 |
注: 尺寸 (A) 必须为 142.0 ± 10.0 mm (5.59 ± 0.40 in)。
- 连接线束组件 (1) 。
Show/hide table
图 6 | g00758636 |
- 安装电缆扎带 (2) 。
Caterpillar Information System:
793B Off-Highway Truck Power Train Torque Converter
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Pallet Forks Operation
420D, 428D, 430D, 432D, 438D, 442D and 446B Backhoe Loaders Power Train Electronic Control System MID 081 - CID 0368 - FMI 06
2000/12/18 A New Shipping Configuration for Certain Off-Highway Trucks {7000}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Piston Motor (Auger Conveyor) - Disassemble
793B Off-Highway Truck Power Train Torque Converter
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Tilt Cylinder - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Tilt Cylinder - Disassemble
Water Spray System Water Control
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Counterbalance Valve (Tailgate)
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Coolant Temperature Is Too High
3054 Engine Exhaust Temperature - Test
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Articulation Bearings - Lubricate
3054 and 3056 Industrial and Generator Set Engines Vibration Damper - Check
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Lift)(Mechanically Operated)
2001/01/29 New Transmission Control and Service Kits Are Available for Articulated Trucks {3065}
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Signal and Pressure Reducing Valve (Steering) - Check
725 and 730 Articulated Trucks Braking System Brake Control Valve (Parking Brake)
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Radiator - Remove
725 and 730 Articulated Trucks Power Train Bypass Valve (Transmission Oil Filter)
725 and 730 Articulated Trucks Power Train Control Valve (Transmission Clutch Latching)
432D and 442D Backhoe Loaders Specifications
725 and 730 Articulated Trucks Power Train Solenoid Valve (Transmission Clutch Latching)