2000/09/04 Caterpillar


Correction to the Callouts for the Extender Cylinder {5640, 6640, 6641}

Usage:

10-20B 2LN
Asphalt Screed:
10-20B (S/N: 2LN1-UP)
10-20WB (S/N: 2MN1-UP)
8-16B (S/N: 7MR1-UP)
Systems Operation, KENR5007, "Screed Extender Hydraulic System". The callouts for the extender cylinder in this story are incorrect. Replace the graphic and callouts for the extender cylinder with the following graphic.


Illustration 1g00736269

Extender Cylinder

(39) Rod

(40) Port for Head End

(41) Port for Rod End

(42) Wiper Seal

(43) Piston

Caterpillar Information System:

950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Oscillating Axle (Rear) - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Oscillating Axle (Rear) - Remove
631E Series II, 633E Series II and 637E Series II Wheel Tractor-Scrapers Air System and Brakes General Troubleshooting Information
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Transmission Control (Shift Lever)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Charging System
PF-300B and PS-300B Pneumatic Compactors Propel System Torque Converter
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Limit Switch (Parking Brake)
Caterpillar Monitoring System Alert Indicator Never Flashes
2001/04/23 Mount Accessories in the Cab with Tapped Holes {7177, 7301, 7325}
Service Life can be Increased with the Installation of LED Lights{1429} Service Life can be Increased with the Installation of LED Lights{1429}
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Compression Brake Solenoid Circuit - Test
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Pulse Width Modulated Sensor
C-15 and C-16 Industrial Engines Air Starting System
834G Wheel Tractor and 836G Landfill Compactor Machine Systems Gear Pump (Implement, Pilot and Braking) - Assemble
2000/09/25 A New Modification Is Used After the Installation of the Bushing in the Harvester Head and Grapple Damper {5569}
CP-323C and CS-323C Paving Compactors Radiator Core - Clean
2000/08/28 Special Instruction, REHS0894, "Speed Sensor Installation" {4351, 4803, 5058}
2000/08/28 Special Instruction, REHS0895, "Speed Sensor Installation" {4351, 4803, 5058}
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Service and Parking Brake - Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Cold Weather Operation
2000/10/09 New Hinges Are Used on the Compartment Doors of Wheel Harvesters {7273}
C-10 and C-12 Industrial Engines Rear Power Take-Off (RPTO)
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Harvester Head
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement Governor and Fuel Transfer Pump - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.