Switch (Boom) - Adjust
The switch must be correctly positioned and the clearance between the boom and the switch must be set correctly.
Use the procedure that follows to set the switch.
- Remove the cover.
Show/hide table
 | |
| Illustration 1 | g00747760 |
- Check the switch position. The correct position is shown in the photograph. The boom must be fully retracted. If the switch position is wrong, the switch will be broken when the boom is extended.
Show/hide table
 | |
| Illustration 2 | g00747759 |
- Measure the clearance (1) between the switch roller and the boom. The clearance must be 6.5 ± 1.5 mm (0.256 ± 0.06 inch).
Show/hide table
 | |
| Illustration 3 | g00750730 |
- Keep the boom level and extend the boom in stages. Measure the clearance at each stage. The clearance must be 6.5 ± 1.5 mm (0.256 ± 0.06 inch).
- If necessary, add or remove shims (2) in order to produce the correct clearance.
Caterpillar Information System:
AP-1050B and BG-245C Asphalt Pavers Tracks - Inspect
AP-1050B and BG-245C Asphalt Pavers Track Roller Bearings - Lubricate
AP-1050B and BG-245C Asphalt Pavers Track Roller Bearings - Inspect
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System MID 113 - CID 0694 - FMI 06
TH103, TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator System General Information
AP-1050B and BG-245C Asphalt Pavers Pump Drive Oil Sample - Obtain
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System MID 113 - CID 0694 - FMI 05
AP-1050B and BG-245C Asphalt Pavers Pump Drive Oil - Change
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Harvester Head System Pressure - Test/Adjust
AP-1050B and BG-245C Asphalt Pavers Power Train Oil Filters - Replace
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System MID 113 - CID 0694 - FMI 03
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System MID 113 - CID 0693 - FMI 07
3500B Engines for Caterpillar Built Machines Air Inlet and Exhaust System Operation
AP-1050B and BG-245C Asphalt Pavers Truck Hitch - Lubricate - If Equipped
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Other Features
TH103, TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator System Sensor
TH103, TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator System Switch (Boom)
TH103, TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator System Display Module
2001/06/11 The Maximum Payload Speed Manager Feature of the VIMS Truck Payload System with VIMS 9.62X and 10.X Classes of Onboard Software {7494, 7601}
2000/09/11 Explanation of Automatic Lubrication System for VIMS {7540, 7601}
TH103, TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator System Sensor - Test
TH103, TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator System Display Module - Replace
TH103, TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator System Calibration
2000/08/28 A Procedure is Available for Checking the Wear of the Service Brake {4251}