Output Shaft Spline - Lubricate
Show/hide table
Accidental machine starting can cause injury or death to personnel working on the machine. To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps. Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on. |
Show/hide table
NOTICE |
---|
Apply lubricant to the fittings with a hand operated grease gun only. Use of pressure operated lubricating equipment damages the seals. |
- Position the felling head on the ground, as shown. If equipped, block the wheels of the machine.
Show/hide table
Illustration 1 | g01027155 |
Typical Example |
- Remove plug (1) .
- Wipe off the grease fitting before lubricating. Lubricate the fitting with approximately four pumps of grease.
- Install plug (1) .
Caterpillar Information System:
AP-1050B and BG-245C Asphalt Pavers Tow Point Cylinders
CB-334D and CB-335D Vibratory Compactors Neutral Start Switch - Test
TH62, TH63, TH82 and TH83 Telehandlers Steering and Hydraulic System Control Valve (Compensating Cylinder)
CB-334D and CB-335D Vibratory Compactors Throttle Control - Lubricate
CB-334D and CB-335D Vibratory Compactors Tire Scraper - Inspect/Adjust/Replace
2000/11/13 New Troubleshooting Procedures for Interlock Electronic Control System {7630}
CB-334D and CB-335D Vibratory Compactors Belts - Inspect/Adjust/Replace
TH103 Telehandler Steering and Hydraulic System Hydraulic Tank
CB-334D and CB-335D Vibratory Compactors Water Spray System - Drain
TH62, TH63, TH82 and TH83 Telehandlers Steering and Hydraulic System Frame Leveling Cylinder
CB-334D and CB-335D Vibratory Compactors Water Spray Nozzles - Clean
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders and 247, 257, 267, 277 and 287 Multi Terrain Loaders Interlock Electronic Control System Solenoid Valve (Parking Brake) Does Not Function Correctly
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Electronic Control Module
HF181, HF201 and HF221 Felling Heads for Track Feller Bunchers Bearing for Output Shaft - Lubricate
CB-334D and CB-335D Vibratory Compactors Hydraulic System Oil Level - Check
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Fan Drive
AP-1050B and BG-245C Asphalt Pavers Machine Controls
TH62, TH63, TH82 and TH83 Telehandlers Steering and Hydraulic System Boom Cylinder (Raise/Lower)
CB-334D and CB-335D Vibratory Compactors Hydraulic System Oil Sample - Obtain
3408B and 3408C Industrial and Marine Engines Exhaust Manifold - Water Cooled
CB-334D and CB-335D Vibratory Compactors Hydraulic Tank Strainer - Clean
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Fan Drive
CB-334D and CB-335D Vibratory Compactors Indicators and Gauges - Test
TH103 Telehandler Steering and Hydraulic System Control Valve (Compensating Cylinder)