2000/08/07 Caterpillar


Revision to Parts Manual for R1700G LHD {3168, 4808, 4820}

Usage:

R1700G 8XZ
Load Haul Dump (LHD):
R1700G (PIN: 8XZ)
Parts Manual, SEBP3045, (9EP6591), "R1700G LHD."

The information in the above parts manual has been revised for 9EP3449 Electrical Arrangement. The correct information is shown in Table 1.

Table 1
S/N:8XZ1-UP
   
Quantity     Part Number     Description     Former Part Number    
1     9EP4996     Electronics Group - Transmission     9EP4258    

Caterpillar Information System:

2000/08/07 Improved Transmission Pressure Switches are Available {1408, 3016, 3154}
2000/07/31 Revision to Parts Manual for R1700G LHD {7510}
2000/08/07 A New Door Latch for the Enclosed Cab is Available {7308}
3126B Engines General Information
2000/08/07 New Software Is Available for the Electronic Transmission Control {3168, 7620}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Transmission - Disassemble
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Diagnostic Codes
3176C and 3196 Engines for Caterpillar Built Machines Poor Acceleration or Response
2000/08/07 Revision to 3176C Engine Specifications for the R1600 LHD {1100}
CB-334D and CB-335D Vibratory Compactors Battery - Recycle
CB-334D and CB-335D Vibratory Compactors Battery - Clean/Check
CB-334D and CB-335D Vibratory Compactors Backup Alarm - If Equipped
2000/10/16 Duo-Cone Seal Kits Have Changed for Off-Highway Trucks {7561}
CB-334D and CB-335D Vibratory Compactors Walk-Around Inspection
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) System Schematic
CB-334D and CB-335D Vibratory Compactors Warranty Information
2000/07/31 An Improved Mounting Bracket for the Steering Metering Pump On Machines With Wheel Steering Is Now Available {4312}
2000/08/07 Revision to Parts Manual for R1300 LHD {5057, 7554}
2000/08/07 The Temperature Switch for the Transmission Has Changed {7413}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System General Information
2000/08/28 Slide Plates Are Now Available for Wheel Harvesters {6501, 6502, 6533}
2000/08/07 Revision to Parts Manual for R1300 LHD {3168, 4808, 4820}
2000/07/31 Correction to Parts Manual for R2900 LHD {3034}
2014/08/11 Diagnostic Cables and Harnesses Are Available {0785}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.