- Integrated Toolcarriers:
- IT62G (PIN: 6PS1-UP)
- Wheel Loaders:
- 950G (PIN: 2JS1-UP; 3JW1-UP; 4BS1-UP; 5FW1-UP)
- 962G (PIN: 3BS1-UP; 4PW1-UP; 5AS1-UP; 7BW1-UP)
- 966G (PIN: 3ZS1-UP; 9RS1-UP; 3SW1-UP; 3PW1-UP)
- 972G (PIN: 7LS1-UP; 1EW1-UP; 4WW1-UP; 6AW1-UP)
Refer to the section "Hazard Flasher". The hazard flasher will not activate from the signal lever.
Change the paragraph that follows illustration 55 to the following text.
Illustration 1 | g00726742 |
The hazard flasher is activated by the switch on the left side of the operator compartment. Push the bottom of the switch in order to activate the hazard flasher. Push the top of the switch in order to deactivate the hazard flasher.
Service Manual module, SEBU7035, "Operation and Maintenance Manual, 966G Wheel Loader and 972G Wheel Loader", "Directional Turn Signal and Hazard Flasher Control (If Equipped)"
Refer to the section "Hazard Flasher". The hazard flasher will not activate from the signal lever.
Add the following directions to the section that was referenced above.
Illustration 2 | g00727344 |
The hazard flasher is activated by the switch on the left side of the operator compartment. Push the bottom of the switch in order to activate the hazard flasher. Push the top of the switch in order to deactivate the hazard flasher.