Cooling System Coolant Level - Check
Show/hide table
 |
Sistem bertekanan: Cairan pendingin yang panas dapat menyebabkan luka bakar serius. Untuk membuka tutup, matikan engine, tunggu sampai radiator menjadi dingin. Kemudian kendoran tutup secara perlahan untuk membebaskan tekanan. |
Show/hide table
 | |
| Ilustrasi 1 | g00726346 |
Tarik tuas pelepas kap penutup (1) untuk membuka pintu akses engine (2) di bagian atas mesin. Tuas pelepas kap penutup terletak di bawah pintu kabin di samping kiri mesin.
- Tutup radiator terletak di bagian atas radiator di samping kiri mesin. Lepaskan tutup radiator secara perlahan untuk membebaskan tekanan dalam sistem.
Show/hide table
 | |
| Ilustrasi 2 | g00723834 |
- Pertahankan ketinggian cairan pendingin di daerah 13 mm (0,5 inch) dari bagian bawah pipa pengisian. Jika cairan pendingin perlu ditambah setiap hari, lakukan pemeriksaan pada sistem pendinginan terhadap adanya kebocoran.
- Periksa seal tutup radiator. Ganti seal tutup radiator apabila seal tutup radiator telah rusak.
- Pasang tutup radiator. Tutup panel akses.
Caterpillar Information System:
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Relays
2000/08/14 Correction to the Directional Turn Signal and Hazard Flasher Control in the Operation and Maintenance Manual {1429, 7332, 7451}
TH62, TH63, TH82 and TH83 Telehandlers Braking System Brakes
3126B Engine for Caterpillar Built Machines Turbocharger Inlet Pressure Sensor
3126B Engine for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Solenoid Valves
Road Analysis Control (RAC) For Off-Highway Truck/Tractors Events
Road Analysis Control (RAC) For Off-Highway Truck/Tractors Installation
424D, 428D and 438D Backhoe Loaders All Wheel Drive Control - If Equipped
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Sensors
216 and 226 Skid Steer Loaders Machine Systems Hydraulic System Troubleshooting
TH62, TH63, TH82 and TH83 Telehandlers Braking System Parking Brake
CB-334D and CB-335D Vibratory Compactors Alert Indicators
CB-334D and CB-335D Vibratory Compactors Backup Alarm - Test
416D Backhoe Loader Cooling System Water Temperature Regulator - Clean/Replace
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Electrical Component and Connector Locations
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Poor Acceleration or Response
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks System Overview
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Temperature Switch (Axle Oil Cooler)
216 and 226 Skid Steer Loaders Machine Systems Hydraulic Oil Contamination - Test
216 and 226 Skid Steer Loaders Machine Systems Filling and Flushing the Hydraulic System - Test
216 and 226 Skid Steer Loaders Machine Systems Pilot System Pressure - Test
216 and 226 Skid Steer Loaders Machine Systems Main Relief Valve - Test and Adjust
216 and 226 Skid Steer Loaders Machine Systems Line Relief Valve - Test and Adjust