938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Caterpillar


Temperature Switch (Axle Oil Cooler)

Usage:

938G 4YS



Illustration 1g00536205

(1) Torque for the installation of the axle oil cooler temperature switch ... 22 ± 2 N·m (16 ± 1 lb ft)

The contacts are normally open below the deactuation temperature.

Actuation temperature ... 65° ± 3°C (150° ± 37°F)

Minimum deactuation temperature ... 58 °C (135 °F)

Caterpillar Information System:

3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks System Overview
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Poor Acceleration or Response
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Electrical Component and Connector Locations
416D Backhoe Loader Cooling System Water Temperature Regulator - Clean/Replace
CB-334D and CB-335D Vibratory Compactors Backup Alarm - Test
CB-334D and CB-335D Vibratory Compactors Alert Indicators
416D Backhoe Loader Cooling System Coolant Level - Check
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Relays
2000/08/14 Correction to the Directional Turn Signal and Hazard Flasher Control in the Operation and Maintenance Manual {1429, 7332, 7451}
TH62, TH63, TH82 and TH83 Telehandlers Braking System Brakes
3126B Engine for Caterpillar Built Machines Turbocharger Inlet Pressure Sensor
3126B Engine for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor
216 and 226 Skid Steer Loaders Machine Systems Hydraulic Oil Contamination - Test
216 and 226 Skid Steer Loaders Machine Systems Filling and Flushing the Hydraulic System - Test
216 and 226 Skid Steer Loaders Machine Systems Pilot System Pressure - Test
216 and 226 Skid Steer Loaders Machine Systems Main Relief Valve - Test and Adjust
216 and 226 Skid Steer Loaders Machine Systems Line Relief Valve - Test and Adjust
216 and 226 Skid Steer Loaders Machine Systems Hydrostatic System - Test and Adjust
TH103 Telehandler Power Train Solenoid Valve (Transmission Clutch)
Road Analysis Control (RAC) For Off-Highway Truck/Tractors Event Interpretation
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Service Tools
322C Excavator Hydraulic System Solenoid Valve (Fine Swing)
416D Backhoe Loader Plate Locations and Film Locations
Road Analysis Control (RAC) For Off-Highway Truck/Tractors Trends
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.