Brush Length - Check
Show/hide table
 | |
| Illustration 1 | g00720873 |
Brush holder (1) Brushes (2) Brush length | |
- Measure the length of brushes (1). The minimum brush length (2) is 7.6 mm (0.30 inch). New brush length (2) is 21.9 mm (0.86 inch).
- Replace the brush holder if the brush length (2) is near the minimum length.
Caterpillar Information System:
JF Series Starting Motor Starting Motor Does Not Turn or Turns Slowly
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Tilt Lever - Remove
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Manifold (Trailer)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Tilt Lever (Front) and Tilt Link (Front) - Install
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Tilt Lever (Front) and Tilt Link (Front) - Remove
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Check Valve (Parking Brake Release)
CB-214D, CB-224D and CB-225D Vibratory Compactors Compaction and Rolling Procedure
TH62, TH63, TH82 and TH83 Telehandlers Tire Shipping Pressure
776D, 777D and 777D HAA Off-Highway Truck/Tractors Hydraulic System Hydraulic System
24H Motor Grader Articulation Cylinder Bearings - Lubricate
JF Series Starting Motor Field Winding - Test
2000/07/17 New Crossover Relief Valves Are Used in the Hydrostatic Pump Group {3203}
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Tilt Lever - Install
JF Series Starting Motor Starting Motor - Disassemble
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Fan Drive System Rocker Switch (Transmission Neutralizer Override Control)
3054B Engine for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
550, 570 and 580 Wheel Harvesters Steering Cylinder Mounting Bolts - Tighten
776D Tractors and 777D and 777D HAA Off-Highway Truck Steering System Gear Pump (Steering)
Alternator - Delco 21SI Field Winding - Test
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Pressure Switch (Secondary Brake and Parking Brake)
TH103 Telehandler Final Drive Oil - Change
TH103 Telehandler Final Drive Oil Level - Check
TH103 Telehandler Shipping the Machine
TH103 Telehandler Frame Leveling Cylinder Pin - Lubricate