Speed Sensor (Transmission) - Assemble
组装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 内径为 31 mm (1.22 in) 的管子 |
1 | |
注: 检查所有 O 形密封圈和部件是否磨损或损坏。 如有必要，请更换部件。 用少量密封的润滑剂润滑所有 O 形密封圈。 用不含松散材料（棉绒）的布清洁所有部件。
- 将护圈 (1) 安置在传感器转子 (3) 上，如图所示。
Show/hide table
 | |
| 图 1 | g00644997 |
- 将滚珠轴承 (2) 安置在传感器转子 (3) 上。 使用工具 (A) 和适当的压具将滚珠轴承 (2) 安装在传感器转子 (3) 中。
- 将挡圈 (4) 安装在传感器转子的槽 (X) 中。
Show/hide table
 | |
| 图 2 | g00645001 |
- 安置传感器壳体 (5) ，如图所示。 旋转护圈，使平边 (Z) 定位在传感器壳体孔口 (Y) 的正上方。
Show/hide table
 | |
| 图 3 | g00645007 |
- 将 O 形密封圈 (6) 安装在转速传感器 (7) 上。 确保转速传感器的 (7) 的可调节盖完全伸出。
Show/hide table
 | |
| 图 4 | g00645009 |
- 将转速传感器 (7) 安装在传感器壳体 (5) 中。 拧紧转速传感器 (7) 至扭矩为 25 ± 5 N·m (18 ± 4 lb ft)。
End By: 安装变速箱转速传感器。 请参阅 拆解和组装, "变速箱转速传感器 - 安装"。
Caterpillar Information System:
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Disassemble
D400E Series II Ejector Truck Lubricant Viscosities
D400E Series II Ejector Truck Dumping
325D and 329D Excavators Hydraulic System Relief Valve (Line)
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Install
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Remove
10B Pavemaster Screed Burner Control
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Drive Shaft (Main) - Remove and Install
D400E Series II Ejector Truck Operating Technique Information
D400E Series II Ejector Truck Refill Capacities
3034 Engine for Caterpillar Built Machines Fuel Injection Lines
D400E Series II Ejector Truck Jacking/Blocking Locations
TH103 Telehandler Hydraulic System Bank Valve
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System System Schematic
D400E Series II Ejector Truck Frame and Body - Inspect
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0027</B> Generator through <B>5N-0050</B> Generator
3114, 3116, and 3126 Engines for Caterpillar Built Machines Air Compressor - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0296 FMI 02 Power Train Electronic Control Module (Electronic Clutch Pressure Control) Incorrect Signal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0533 FMI 02 Machine Electronic Control Module (Integrated Brake) Incorrect Signal - Test
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Gear Pump (Transmission Charging and Scavenge) - Remove
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0562 FMI 02 Caterpillar Monitoring System Incorrect Signal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0590 FMI 02 Electronic Control Module (Engine) Incorrect Signal - Test
3126 Truck Engine Military Housing (Front) - Install
2000/04/17 An Improved Cap for the Seat Switch is Available {7312}