776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Caterpillar


Speed Sensor (Transmission) - Remove

Usage:

777D 2YW

拆卸步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     6V-0006     钳     1    



    图 1g00644981

  1. 拆下螺栓 (1) 和垫圈。 拆卸螺栓 (3) 、硬垫圈、孔环和隔套。 拆卸转速传感器的护罩 (2) 并拆卸护罩下方的夹子(图中未显示)。



    图 2g00644984

  1. 拆卸将导线线束 (4) 固定至转速传感器 (6) 的锁环 (5) 。 使用工具 (A) (图中未显示)从电气接头的转速传感器 (6) 断开导线线束 (4) 。



    图 3g00644985

  1. 拆卸将传感器壳体 (7) 固定至盖组件的其余四颗螺栓 (3) 、硬垫圈、孔环和隔套。 朝车辆后部滑动传感器壳体 (7) ,使其脱离调速器驱动轴。

  1. 从传感器壳体 (7) 拆卸隔套 (8) 。

Caterpillar Information System:

10B Pavemaster Screed Burner Control
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Drive Shaft (Main) - Remove and Install
D400E Series II Ejector Truck Operating Technique Information
D400E Series II Ejector Truck Refill Capacities
3034 Engine for Caterpillar Built Machines Fuel Injection Lines
D400E Series II Ejector Truck Jacking/Blocking Locations
D400E Series II Ejector Truck Sampling Interval and Location of Sampling Valve
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Relief Valve (Brake Oil Cooler)
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Relief Valve (Brake Oil Cooler)
797 Off-Highway Truck Power Train Differential and Bevel Gear - Assemble
D400E Series II Ejector Truck Lifting and Tying Down the Machine
D400E Series II Ejector Truck Tailgate
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Install
325D and 329D Excavators Hydraulic System Relief Valve (Line)
D400E Series II Ejector Truck Dumping
D400E Series II Ejector Truck Lubricant Viscosities
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Disassemble
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Assemble
TH103 Telehandler Hydraulic System Bank Valve
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System System Schematic
D400E Series II Ejector Truck Frame and Body - Inspect
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0027</B> Generator through <B>5N-0050</B> Generator
3114, 3116, and 3126 Engines for Caterpillar Built Machines Air Compressor - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0296 FMI 02 Power Train Electronic Control Module (Electronic Clutch Pressure Control) Incorrect Signal - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.