776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Caterpillar


Speed Sensor (Transmission) - Disassemble

Usage:

777D 2YW

拆解步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     FT-0995     拉拔器爪     2    
A     9S-9155     隔套     1    
A     5F-7345     螺钉     1    
A     1P-0070     头     1    

开始:

  1. 卸下变速箱转速传感器。 请参阅拆解和组装, "变速箱转速传感器 - 拆卸"。



    图 1g00644986

  1. 从传感器壳体 (1) 上拆下转速传感器 (2) 。 将 O 形密封圈从转速传感器 (2) 上拆下。



    图 2g00644988

  1. 转动传感器转子 (3) ,使 4 颗螺栓 (4) 和垫圈可以通过传感器转子 (3) 上的孔看到,如图所示。

  1. 拆卸将护圈固定至传感器壳体 (1) 上的 4 颗螺栓 (4) 和垫圈。 从传感器壳体 (1) 拆卸传感器转子 (3) 和护圈。



    图 3g00644992

  1. 拆卸将滚珠轴承 (5) 固定至传感器转子 (3) 的挡圈 (6) 。



    图 4g00644994

  1. 使用工具 (A) 从传感器转子 (3) 拆卸滚珠轴承 (5) 。

  1. 从传感器转子 (3) 拆卸护圈 (7) 。

Caterpillar Information System:

D400E Series II Ejector Truck Lubricant Viscosities
D400E Series II Ejector Truck Dumping
325D and 329D Excavators Hydraulic System Relief Valve (Line)
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Install
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Remove
10B Pavemaster Screed Burner Control
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Drive Shaft (Main) - Remove and Install
D400E Series II Ejector Truck Operating Technique Information
D400E Series II Ejector Truck Refill Capacities
3034 Engine for Caterpillar Built Machines Fuel Injection Lines
D400E Series II Ejector Truck Jacking/Blocking Locations
D400E Series II Ejector Truck Sampling Interval and Location of Sampling Valve
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Assemble
TH103 Telehandler Hydraulic System Bank Valve
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System System Schematic
D400E Series II Ejector Truck Frame and Body - Inspect
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0027</B> Generator through <B>5N-0050</B> Generator
3114, 3116, and 3126 Engines for Caterpillar Built Machines Air Compressor - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0296 FMI 02 Power Train Electronic Control Module (Electronic Clutch Pressure Control) Incorrect Signal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0533 FMI 02 Machine Electronic Control Module (Integrated Brake) Incorrect Signal - Test
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Gear Pump (Transmission Charging and Scavenge) - Remove
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0562 FMI 02 Caterpillar Monitoring System Incorrect Signal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0590 FMI 02 Electronic Control Module (Engine) Incorrect Signal - Test
3126 Truck Engine Military Housing (Front) - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.