Speed Sensor (Transmission) - Install
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 6V-0006 | 钳 | 1 |
注: 检查所有部件是否磨损或损坏。 如有必要，请更换部件。 用不含松散材料（棉绒）的布清洁所有部件。
- 将隔套 (8) 安装在传感器壳体 (7) 上，使隔套的唇部朝向分动器壳体。
Show/hide table
 | |
| 图 1 | g00644985 |
- 将传感器壳体 (7) 和隔套 (8) 放置在盖组件上。 确保传感器轴上的花键与传感器转子中的花键接合。
- 安装四个隔套、四个孔环、四个硬垫圈和四个螺栓 (3) 。
- 使用工具 (A) （图中未显示）将导线线束 (4) 连接至电气接头的转速传感器 (6) 。 安装新的安全锁线 (5) 。
Show/hide table
 | |
| 图 2 | g00644984 |
- 放置夹子（图中未显示）和护罩 (2) 。 安装螺栓 (1) 和垫圈。 安装隔套、孔环、硬垫圈和螺栓 (3) 。
Show/hide table
 | |
| 图 3 | g00644981 |
Caterpillar Information System:
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Remove
10B Pavemaster Screed Burner Control
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Drive Shaft (Main) - Remove and Install
D400E Series II Ejector Truck Operating Technique Information
D400E Series II Ejector Truck Refill Capacities
3034 Engine for Caterpillar Built Machines Fuel Injection Lines
D400E Series II Ejector Truck Jacking/Blocking Locations
D400E Series II Ejector Truck Sampling Interval and Location of Sampling Valve
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Relief Valve (Brake Oil Cooler)
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Relief Valve (Brake Oil Cooler)
797 Off-Highway Truck Power Train Differential and Bevel Gear - Assemble
D400E Series II Ejector Truck Lifting and Tying Down the Machine
325D and 329D Excavators Hydraulic System Relief Valve (Line)
D400E Series II Ejector Truck Dumping
D400E Series II Ejector Truck Lubricant Viscosities
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Disassemble
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Speed Sensor (Transmission) - Assemble
TH103 Telehandler Hydraulic System Bank Valve
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System System Schematic
D400E Series II Ejector Truck Frame and Body - Inspect
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0027</B> Generator through <B>5N-0050</B> Generator
3114, 3116, and 3126 Engines for Caterpillar Built Machines Air Compressor - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0296 FMI 02 Power Train Electronic Control Module (Electronic Clutch Pressure Control) Incorrect Signal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0533 FMI 02 Machine Electronic Control Module (Integrated Brake) Incorrect Signal - Test