Cylinder Head - Remove
拆卸步骤
Show/hide table
需要的工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7575     | 连接支架     | 2     |
开始:
- 拆下摇臂和摇臂轴。 请参阅解体和组装, "摇臂和摇臂轴 - 拆卸"。
- 拆下单体喷油器。 请参阅解体和组装, "单体喷油器 - 拆卸"。
- 拆下交流发电机。 请参阅解体和组装, "交流发电机 - 拆卸和安装"。
- 拆下气门机构盖座。 请参阅解体和组装, "气门机构盖座 - 拆卸和安装"。
- 从冷却系统将冷却液排入合适的容器以便保存或废弃这些冷却液。 请参阅操作和保养手册, "加注容量和建议"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 拆下附件驱动总成 (1) 。
Show/hide table
图 1 | g01063034 |
- 断开管路总成 (3) 和 (4) 。
- 拆下管路组件 (2) 。
- 断开软管 (5) 。
- 断开软管组件 (6) 和 (7) 。
Show/hide table
图 2 | g01142119 |
- 断开传感器。
- 在缸盖 (9) 上固定工具 (A) 和适当的提升装置。 缸盖 (9) 的重量约为 147 kg (325 lb)。
- 拆下螺栓 (8) 。 拆下缸盖 (9) 和密封垫。
Caterpillar Information System:
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Pressure Reducing Valve (Hoist Pilot Pressure) - Test and Adjust
561M Pipelayer Control Valve (Boom Stop) - Assemble
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Parking Brake Control - Adjust
SR4 and SR4B Electric Power Generation Rewind Data General Information
12H, 140H and 160H Motor Graders Machine Systems Wheel Lean Arm - Install
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Disassemble
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Digital Sensor Supply
C-9 Engines for Caterpillar Built Machines Aftercooler - Test
3054 and 3056 Industrial and Generator Set Engines Turbocharger
797 Off-Highway Truck Fan Drive Hydraulic System Motor Rotating Group (Fan Drive) - Adjust
12H, 140H and 160H Motor Graders Machine Systems Wheel Lean Arm - Remove
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Service Brake Control (Pedal) - Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Service Brake Control Valve - Check
12H, 140H and 160H Motor Graders Machine Systems Wheel Lean Cylinder - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems Front Axle - Remove
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Cat Data Link
416C, 426C, 428C, 436C and 438C Backhoe Loaders Air Inlet Heater Starting Aid
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Electrical Connector - Inspect
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Electrical Connectors and Functions
561M Pipelayer Control Valve (Boom Stop) - Remove
C9 Engine For Caterpillar Built Machines Cylinder Head - Install
12H, 140H and 160H Motor Graders Machine Systems Front Axle - Install
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks MID 036 - CID 0267 - FMI 02 Incorrect Engine Shutdown Switch inputs
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Cylinder - Test