216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders and 247, 257, 267, 277 and 287 Multi Terrain Loaders Interlock Electronic Control System Caterpillar

• switch (seat)

• switch (armrest)

The machine may be started once these conditions are met. The operator must remain in the seat with the armrest in the down position in order to enable the machine.

The operator should then press the parking brake switch. Releasing the parking brake enables the hydrostatic system and the work tool interlock.

Note: Raising the armrest and/or exiting the seat will cause the following conditions: a disabled hydrostatic system, a disabled work tool interlock and an engaged parking brake.

The work tool lockout feature is enabled once the engine is started. If the work tool lockout switch is in the locked position, then the work tools will be locked out.