Transfer Gear End Play - Adjust
简介
以下步骤描述了分动器端隙的调整方法。
机器准备
- 将分动器从机器上拆下。 参考拆解和装配, "变速箱和分动器 - 拆卸"和拆解和装配, "变速箱和分动器 - 分离"了解相关说明。
调整步骤
Show/hide table
 | |
| 图 1 | g02711494 |
分动器的典型视图 (1) 垫片 (2) 齿轮 (3) 保持架 (4) 轴承组件 (5) 螺栓 (6) 齿轮 (7) 轴承组件 (8) 保持架 (9) 螺栓 (10) 垫片 | |
- 将壳体定位到水平位置。 确保轴承轴垂直。
- 安装齿轮 (2) 、齿轮 (6) 、轴承组件 (4) 、轴承组件 (7) 、轴承罩 (3) 和轴承罩 (8) 。 此时请勿使用任何密封或垫片。 均匀拧紧螺栓 (5) 和螺栓 (9) 。
- 将轴承组件 (4) 和轴承组件 (7) 转动几圈以便使滚轮落座。 您也可以通过前后移动轴承组件 (4) 和轴承组件 (7) 来使滚轮落座。
- 测量罩盖 (3) 和壳体之间的轴向间隙。 测量罩盖 (8) 和壳体之间的轴向间隙。
- 添加垫片 (1) 和 (10) 以使轴向间隙达到 0.15 ± 0.05 mm (0.006 ± 0.002 in)。
- 安装垫片后重复本步骤。 如有必要，调整垫片数量。
工作表
Show/hide table
| 调整分动器端隙的工作表 | ||
| 位置 | 实际端隙 | 目标端隙 |
| 保持架 (3) 和壳体 | 0.15 ± 0.05 mm (0.006 ± 0.002 in) |
|
| 保持架 (8) 和壳体 | 0.15 ± 0.05 mm (0.006 ± 0.002 in) |
|
Caterpillar Information System:
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Fixed Axle and Oscillating Axle
D250E Series II and D300E Series II Articulated Trucks Machine Systems Fuel Tank - Remove
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Solenoid Valve (Pilot Proportioning)
773D Off-Highway Truck and 775D Quarry Truck Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Body Up Gear Limit Function
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
561N, 572R, 572R Series II and 587T Pipelayers and D5M, D5N, D6M, D6N, D6R, D6R Series II, D6R Series III, D7R, D7R Series II, D10R, D10T, D11N, D11R and D11T Track-Type Tractors Steering Gear - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Piston Pump (Steering) Pressure - Test and Adjust
793C and 793C XQ Off-Highway Truck Air System and Brakes Air Dryer
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Stabilizer Link
CB-534C and CB-634C Vibratory Compactors Steering System Steering Time - Check
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Steering Cylinder - Install
793C and 793C XQ Off-Highway Truck Air System and Brakes Pressure Protection Valve (Brake Air System)
554 Forwarder and 574 Forwarder Oil Filter (Power Train Tank Fill) - Replace
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Transmission Hydraulic Control - Test
554 Forwarder and 574 Forwarder Log Loader Extendable Stick - Lubricate
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Differential
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System General Information
773D Off-Highway Truck and 775D Quarry Truck Power Train Transmission Hydraulic Control - Test
D250E Series II and D300E Series II Articulated Trucks Machine Systems Front Suspension Arm - Remove
561M Pipelayer Fuel System Secondary Filter - Replace
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Top Gear Function
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System System Schematic
784C and 785C Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Brake) - Disassemble