Steering Cylinder - Install
- Attach the steering cylinder to a suitable hoist. Put the steering cylinder in position in the machine. The weight of the steering cylinder is
73 kg (160 lb) .Show/hide tableIllustration 1 g00525751 - Install pin assembly (14), bolt (12) and washer (13).
Show/hide table
Illustration 2 g00525750 Show/hide tableIllustration 3 g00525755 - Install pin assembly (7), bolt (5) and washer (6).
- Measure the length of pin assembly (7) that is extending beyond the bottom of the mounting bracket. Install the appropriate number of spacers (11) in order to maintain a gap of
3 mm (0.12 inch) or less. - Apply 4C-4030 Thread Lock Compound to bolt (9). Install plate (8), washer (10) and bolt (9). Tighten the bolt to a torque of
28 ± 7 N·m (20 ± 5 lb ft) . - Install hose assembly (3), four bolts (1) and flange (2).
- Connect the grease line and tube assembly (4).
End By:
- Install the platforms. Refer to Disassembly and Assembly, "Operator Platform - Install".
Caterpillar Information System:
784C and 785C Off-Highway Trucks Machine Systems Relief Valve (Cylinder Crossover) - Assemble
D250E Series II and D300E Series II Articulated Trucks Machine Systems Front Frame and Rear Frame - Connect
D250E Series II and D300E Series II Articulated Trucks Machine Systems Front Frame and Rear Frame - Separate
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Center) - Assemble
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Center) - Disassemble
561N, 572R, 572R Series II and 587T Pipelayers and D5M, D5N, D6M, D6N, D6R, D6R Series II, D6R Series III, D7R, D7R Series II, D10R, D10T, D11N, D11R and D11T Track-Type Tractors Steering Gear - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Center) - Install
2Q-8292 Axle Guard Kit (Front) and 2Q-8293 Axle Guard Kit (Rear) Custom Product Support Literature for 826G Compactor{3259, 3259} 2Q-8292 Axle Guard Kit (Front) and 2Q-8293 Axle Guard Kit (Rear) Custom Product Support Literature for 826G Compactor{3259, 3259}
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Center) - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Body and Canopy - Remove
554 Forwarder and 574 Forwarder Engine Oil and Filter - Change
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Steering Cylinder - Remove
CB-534C and CB-634C Vibratory Compactors Steering System Steering Time - Check
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Stabilizer Link
793C and 793C XQ Off-Highway Truck Air System and Brakes Air Dryer
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Piston Pump (Steering) Pressure - Test and Adjust
561N, 572R, 572R Series II and 587T Pipelayers and D5M, D5N, D6M, D6N, D6R, D6R Series II, D6R Series III, D7R, D7R Series II, D10R, D10T, D11N, D11R and D11T Track-Type Tractors Steering Gear - Install
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Body Up Gear Limit Function
773D Off-Highway Truck and 775D Quarry Truck Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Solenoid Valve (Pilot Proportioning)
D250E Series II and D300E Series II Articulated Trucks Machine Systems Fuel Tank - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Fixed Axle and Oscillating Axle
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Transfer Gear End Play - Adjust