527 Track-Type Skidder Machine Supplements Caterpillar

Installation Procedure

Show/hide table



Illustration 1	g00619647

1. Be sure that the O-ring seal is in position on the front of the pump.

2. The approximate weight of the implement pump is 33 kg (73 lb). Use a floor jack to put the implement pump in position.

3. Install the washers and four nuts (7) .

Show/hide table



Illustration 2	g00619642

4. Connect hose assemblies (3), (4), (5), and (6) to the implement pump.

Show/hide table



Illustration 3	g00619640

5. The weight of the rear bottom guard is 70 kg (155 lb). Use bolts (1) and the washers to install rear bottom guard (2) .

6. Fill the hydraulic tank to the correct level.

Note: For the correct procedure to fill the hydraulic system on the 527 Track-Type Skidder, refer to Operation and Maintenance Manual, SEBU7001, "Hydraulic System Oil - Change".