824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Caterpillar


Vane Pump (Fan Drive)

Usage:

824G 4SN



Illustration 1g00520326

The rotation of the shaft is clockwise when the pump is viewed from the drive end.

For testing purposes, use SAE 10W oil at 65°C (150°F).

Test at Full Speed:

Output ... 54 L/min (14 US gpm)
Pressure ... 690 kPa (100 psi)
Pump speed ... 2100 rpm
Engine speed ... 2100 rpm
Output ... 49 L/min (13 US gpm)
Pressure ... 6900 kPa (1000 psi)
Pump speed ... 2100 rpm
Engine speed ... 2100 rpm

Test at Half Speed:

Output ... 24 L/min (6 US gpm)
Pressure ... 690 kPa (100 psi)
Pump speed ... 1050 rpm
Engine speed ... 1050 rpm
Output ... 21 L/min (6 US gpm)
Pressure ... 6900 kPa (1000 psi)
Pump speed ... 1050 rpm
Engine speed ... 1050 rpm

(1) 6J-2935 Spring

Length under test force ... 14.7 mm (.58 inch)
Test force ... 192 ± 14 N (43.1635 ± 3.1473 lb)
Free length after test ... 29.7 mm (1.17 inch)
Outside diameter ... 29.65 ± .52 mm (1.167 ± .020 inch)

(2) Torque for the four bolts ... 80 ± 5 N·m (60 ± 5 lb ft)

Caterpillar Information System:

793C and 793C XQ Off-Highway Trucks Hydraulic System Brake Oil Overheating Troubleshooting
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Oil Filter (Steering)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Transfer Gears
527 Track-Type Skidder Machine Supplements Hydraulic Tank - Remove
527 Track-Type Skidder Machine Supplements Hydraulic Tank - Remove
527 Track-Type Skidder Machine Supplements Hydraulic Tank - Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Battery or Battery Cable - Inspect/Replace
3176C and 3196 Engines For Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
773D Off-Highway Truck and 775D Quarry Truck Power Train Torque Converter
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Secondary Steering Backup)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Primary Steering Backup)
3176C and 3196 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
527 Track-Type Skidder Machine Supplements Hydraulic Tank - Install
527 Track-Type Skidder Machine Supplements Implement Pump - Remove
527 Track-Type Skidder Machine Supplements Implement Pump - Install
527 Track-Type Skidder Machine Supplements Implement Pump - Disassemble
527 Track-Type Skidder Machine Supplements Implement Pump - Assemble
527 Track-Type Skidder Machine Supplements Bulldozer Control Valve - Remove
527 Track-Type Skidder Machine Supplements Bulldozer Control Valve - Install
527 Track-Type Skidder Machine Supplements Bulldozer Control Valve - Disassemble
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission and Transfer Gears - Remove
527 Track-Type Skidder Machine Supplements Bulldozer Control Valve - Assemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Control Valve
527 Track-Type Skidder Machine Supplements Governor Control Linkage and Decelerator - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.