Parking Brake Manual Release
Show/hide table
Personal injury or death can result from a brake malfunction. Do not operate the machine if the brake was applied due to a malfunction of the oil system or the brake. Correct any problem before attempting to operate the machine. |
- Block the wheels in order to prevent the machine from rolling when the parking brake is released.
- Connect the steering frame lock between the front frame and the rear frame.
Show/hide table
Illustration 1 g00516546 - Loosen locknut (1) by
18 mm (0.71 inch) . Turn rod (2) outward until the parking brake is completely released.
Note: Before the machine is operated, adjust the parking brake. For the correct procedure, refer to the Testing and Adjusting manual for your machine's braking system.
Caterpillar Information System:
980G Wheel Loader Power Train Drive Shaft (Center) - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Machine Preparation for Troubleshooting
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Oil Filter (Parking Brake Release)
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Steering Cylinder - Install
527 Track-Type Skidder Power Train Undercarriage
AP-1000B and BG-260C Asphalt Pavers Engine Starting
3176C and 3196 Engines For Caterpillar Built Machines Cylinder Liner - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Operational Checks
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Visual Inspection
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Pump Flow - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Machine Preparation for Troubleshooting
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Check Valve (Parking Brake Release)
773D Off-Highway Truck and 775D Quarry Truck Air System and Brakes Check Valve (Parking Brake Release)
3176C and 3196 Engines For Caterpillar Built Machines Piston Cooling Jets - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Pistons and Connecting Rods - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train General Information
3176C and 3196 Engines For Caterpillar Built Machines Pistons and Connecting Rods - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Troubleshooting
3406E On-Highway Engine Engine Oil Pump - Install
793C and 793C XQ Off-Highway Truck Hydraulic System Body Mounting
3524B Engines for Off-Highway Trucks Intermittent Low Power or Power Cutout
527 Track-Type Skidder Power Train Tracks
3524B Engines for Off-Highway Trucks ECM Will Not Communicate with Other Systems or Display Modules