Water Outlet Manifold - Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 5P-3413 | Pipe Sealant | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Inspect the condition of the gaskets. Replace the gaskets, if necessary.
- Install the gaskets and position water outlet manifold (2) and water temperature regulator housing (3) as a unit on the cylinder head.
- Install bolts (7) and the washers.
- Apply Tooling (A) to the threads of plugs (6). Install plugs (6).
- Position tube assembly (4) and install bolts (5) and the washers.
- Connect harness assembly (1).
- Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual for the correct filling procedure.
Show/hide table
| |
| Illustration 1 | g01062742 |
Show/hide table
| |
| Illustration 2 | g01062741 |
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Water Outlet Manifold - Remove
3406E and 3456 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Electric Drive Pump (Secondary Steering and Brake Release)
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0646 FMI 03 Solenoid Valve 6 (Speed Clutch) Voltage Above Normal - Test
583R Pipelayer Power Train Idlers (Track)
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0645 FMI 03 Solenoid Valve 5 (Speed Clutch) Voltage Above Normal - Test
AP-1055B and BG-2455C Asphalt Pavers Time Delay Relay Control (Leveling)
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0644 FMI 03 Solenoid Valve 4 (Speed Clutch) Voltage Above Normal - Test
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Refrigerant Compressor - Remove and Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Air/Hydraulic Cylinder (Front Caliper)
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0643 FMI 03 Solenoid Valve 3 (Direction Clutch) Voltage Above Normal - Test
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0642 FMI 03 Solenoid Valve 2 (Direction Clutch) Voltage Above Normal - Test
3176C and 3196 Engines For Caterpillar Built Machines Inlet Manifold - Remove
3176C and 3196 Engines For Caterpillar Built Machines Inlet Manifold - Install
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks In-Line Refrigerant Dryer - Remove and Install
3406E On-Highway Engine Gear Group (Front) - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Secondary Steering System - If Equipped
3406E On-Highway Engine Engine Oil Pan - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System General Information
D250E Series II and D300E Series II Articulated Trucks Machine Systems Service Brake - Disassemble
554 Forwarder and 574 Forwarder Hand Controls
3524B Engines for Off-Highway Trucks Low Power/Poor or No Response to Throttle
793C Off-Highway Truck/Tractor Power Train Final Drive - Disassemble