Illustration 1 | g00948411 |
(1) Torque for two screws ... 25 ± 6 N·m (18.4 ± 4.4 lb ft)
Illustration 2 | g00948413 |
View A-A |
Illustration 3 | g00948417 |
View B |
(2) 106-8223 Pad Assembly
(3) 106-8224 Shim
- Thickness ... 2.0 mm (0.08 inch)
Note: Refer to the Hydraulic System Systems Operation/Testing and Adjusting, "Pad Assembly (Dump Body) - Install and Adjust" for the proper installation procedure of the pad assemblies and shims.
(4) Shoe
Illustration 4 | g00948419 |
View C-C |
(5) Use 124-9014 Washer (3 mm (0.1 inch)) only if 7D-7488 Washer (5 mm (0.2 inch)) will not assemble in two places.
Illustration 5 | g00948420 |
View D |
(6) Magnet assembly
(7) Body down or up switch electronic control
(8) Bracket
(X) Correct distance ... 4.0 ± 1.0 mm (0.16 ± 0.04 inch)
Note: Before making adjustments to body down or up switch electronic control (7), the pad assembly (2) and the shims (3) must be installed. Refer to the Hydraulic System Systems Operation/Testing and Adjusting, "Electronic Control (Body Down or Up Switch) - Adjust" for the proper installation of the body down or up switch electronic control.