Flywheel - Remove
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7573 | Lifting Bracket | 2 |
| B | FT2712 | Guide Stud | 2 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install Tooling (A) on the flywheel. Use a suitable lifting device. The weight of the flywheel is approximately
65 kg (143 lb) . - Remove two bolts (1). Install Tooling (B).
- Remove remaining bolts (1) that hold the flywheel to the crankshaft . Remove flywheel (2).
Show/hide table
Illustration 2 g01042415 - If necessary, use a hammer and a punch in order to remove ring gear (3) from flywheel (2).
Show/hide table
| |
| Illustration 1 | g01042414 |
Caterpillar Information System:
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Fuse Panels
3406C Engines for Caterpillar Built Machines Engine Oil Pressure Switch
3176C and 3196 Engines For Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Hydraulic System Body Mounting
776D Tractor and 777D and 777D HAA Off-Highway Truck Hydraulic System Cab Mounting
784C and 785C Off-Highway Trucks Machine Systems VIDS/VIMS Main Module - Remove and Install
3406E On-Highway Engine Crankshaft - Install
784C and 785C Off-Highway Trucks Machine Systems VIDS/VIMS Interface Module - Remove and Install
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Fuel Priming Pump - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Switches (Lamps) - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Machine Systems Parking Brake - Remove
793C Off-Highway Truck/Tractor Power Train Differential and Bevel Gear - Disassemble
D250E Series II and D300E Series II Articulated Trucks Machine Systems Parking Brake - Disassemble
3176C and 3196 Engines For Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
3406C Engines for Caterpillar Built Machines Magnetic Pickup
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Mix Height Control
3176C and 3196 Engines For Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
773D Off-Highway Truck and 775D Quarry Truck Hydraulic System Body Mounting
D250E Series II and D300E Series II Articulated Trucks Machine Systems Parking Brake - Install
793C Off-Highway Truck/Tractor Power Train Differential and Bevel Gear - Assemble
583R Pipelayer Power Train Recoil Group
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Solenoid Valve (Overspeed)
3406C Engines for Caterpillar Built Machines Fuel Pressure Indicator
325B Excavator Machine Systems Swing Motor - Disassemble