Valve Mechanism Cover Base - Remove and Install
拆卸步骤
开始:
- 拆下气门机构罩盖。 请参阅拆解和组装, "气门机构盖 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 断开线束组件 (2) 和夹子。 松开卡箍 (1) 并且将软管从配气机构盖底座侧面拆除。 将传感器 (3) 从配气机构罩盖底座上卸下。
Show/hide table
 | |
| 图 1 | g00668535 |
- 卸下螺栓 (4) 和垫圈 (6) 。
Show/hide table
 | |
| 图 2 | g00515303 |
- 拆除隔离件 (7) 和隔离件套筒 (8) 。
- 拆下配气机构罩盖底座 (5) 和密封垫 (9) 。
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将底座密封垫 (9) 和配气机构盖底座 (5) 安装在气缸盖上。
Show/hide table
| | |
| 图 3 | g00515303 |
Show/hide table
 | |
| 图 4 | g01067433 |
- 安装隔离件套筒 (8) 和隔离件 (7) 。
- 安装垫圈 (6) 和螺栓 (4) 。 按照数字顺序依次拧紧螺栓。 拧紧螺栓至扭矩为 28 ± 7 N·m (21 ± 5 lb ft)。
- 安装传感器 (3) 。
Show/hide table
| | |
| 图 5 | g00668535 |
- 连接线束组件 (2) 和夹子。
- 将软管与配气机构盖底座侧面相连并且拧紧卡箍 (1) 。
End By: 安装气门机构盖。 请参阅 拆解和组装, "气门机构盖 - 拆卸和安装"。
Caterpillar Information System:
D250E Series II and D300E Series II Articulated Trucks Machine Systems Parking Brake - Disassemble
3406E On-Highway Engine Flywheel - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Fuse Panels
3406C Engines for Caterpillar Built Machines Engine Oil Pressure Switch
3176C and 3196 Engines For Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Hydraulic System Body Mounting
776D Tractor and 777D and 777D HAA Off-Highway Truck Hydraulic System Cab Mounting
784C and 785C Off-Highway Trucks Machine Systems VIDS/VIMS Main Module - Remove and Install
3406E On-Highway Engine Crankshaft - Install
784C and 785C Off-Highway Trucks Machine Systems VIDS/VIMS Interface Module - Remove and Install
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Fuel Priming Pump - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Switches (Lamps) - Remove and Install
3406C Engines for Caterpillar Built Machines Magnetic Pickup
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Mix Height Control
3176C and 3196 Engines For Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
773D Off-Highway Truck and 775D Quarry Truck Hydraulic System Body Mounting
D250E Series II and D300E Series II Articulated Trucks Machine Systems Parking Brake - Install
793C Off-Highway Truck/Tractor Power Train Differential and Bevel Gear - Assemble
583R Pipelayer Power Train Recoil Group
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Solenoid Valve (Overspeed)
3406C Engines for Caterpillar Built Machines Fuel Pressure Indicator
325B Excavator Machine Systems Swing Motor - Disassemble
793C and 793C XQ Off-Highway Truck Hydraulic System Control Valve (Hoist)
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Hydraulic System Hydraulic Tank (Hoist and Brake)