Truck Body - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1U-8233 | Nylon Lifting Sling | 4 |
B | 140-7742 | Protective Sleeve | 4 |
- Use four protective sleeves (3) in order to attach four lifting slings (2) to dump body (1). Lift the dump body with an appropriate hoist.
- Position the dump body so that the pivot brackets of the dump body are directly over the hoist pivots.
Show/hide table
Illustration 2 g00515180 - Lower the dump body until pins (4) can be inserted through the hoist pivots. Make sure that there is an equal gap on either side of the pivots. Install the shims in order to eliminate lateral movement.
Show/hide table
Illustration 3 g00515691 - Release the pressure on the lifting slings. Install bolt (6), the nut and the washer in two places.
Show/hide table
Illustration 4 g00515694 - Install lights (7) with bolts, nuts and washers (8). Connect electrical connections (5).
Show/hide table
Illustration 1 | g00515675 |
End By:
- Install the tailgate cylinder. See Disassembly and Assembly, "Tailgate Cylinder - Install". The information is in this manual.
- Install both hoist cylinders. See Disassembly and Assembly, "Hoist Cylinder - Install". The information is in this manual.
Caterpillar Information System:
980G Wheel Loader Power Train Parking Brake - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Switches (Instrument Panel) - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Resolver Network Check
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering and Brake Manifold Valve
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Piston Pump (Implement and Steering)
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Priority Valve
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0641 FMI 03 Solenoid Valve 1 (Direction Clutch) Voltage Above Normal - Test
583R Pipelayer Power Train Tracks
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Solenoid Valve (Pilot Diverter, 4 Function Hydraulics) Operation - Check
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Remove
793C Off-Highway Truck/Tractor Power Train Axle Shaft - Install
824G , 825G and 826G Landfill Compactor Tilt Cylinder Brace
793C Off-Highway Truck/Tractor Power Train Differential and Bevel Gear - Disassemble
D250E Series II and D300E Series II Articulated Trucks Machine Systems Parking Brake - Remove
784C and 785C Off-Highway Trucks Machine Systems Switches (Lamps) - Remove and Install
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Fuel Priming Pump - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems VIDS/VIMS Interface Module - Remove and Install
3406E On-Highway Engine Crankshaft - Install
784C and 785C Off-Highway Trucks Machine Systems VIDS/VIMS Main Module - Remove and Install
776D Tractor and 777D and 777D HAA Off-Highway Truck Hydraulic System Cab Mounting
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Hydraulic System Body Mounting
3176C and 3196 Engines For Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3406C Engines for Caterpillar Built Machines Engine Oil Pressure Switch