Piston Cooling Jets - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 9S-9082     | 发动机盘车工具     | 1     |
开始:
- 拆卸发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 转动曲轴,以便可以接近活塞冷却喷嘴。
Show/hide table
图 1 | g01004705 |
- 拆下螺栓 (1) 和活塞冷却喷嘴 (2) 。
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 9S-9082     | 发动机盘车工具     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 转动曲轴,以便可以接近活塞冷却喷嘴。
Show/hide table
图 2 | g01004705 |
- 安装活塞冷却喷嘴 (2) 和螺栓 (1) 。 拧紧螺栓 (1) 至 40 ± 8 N·m (30 ± 6 lb ft) 的扭矩。
- 检查活塞、活塞冷却喷嘴与曲轴之间的间隙。
活塞、活塞冷却喷嘴和曲轴之间的最小允许间隙 ... 0.63 mm (0.025 in)
End By: 安装发动机机油泵。 请参阅 拆解和组装, "发动机机油泵 - 安装"。
Caterpillar Information System:
583R Pipelayer Power Train Torque Converter Outlet Relief Valve - Install
784C and 785C Off-Highway Truck/Tractors Steering System Pressure Switches
784C and 785C Off-Highway Trucks Machine Systems Gear Pump (Torque Converter and Parking Brake Release) - Remove
980G Wheel Loader Power Train Output Transfer Gears - Assemble
554 Forwarder and 574 Forwarder Model View Illustrations
793C Off-Highway Truck Power Train Relief Valve (Torque Converter Outlet) - Remove and Install
980G Wheel Loader Machine Systems Piston Pump (Steering) - Disassemble
784C and 785C Off-Highway Truck/Tractors Steering System Metering Pump (Steering)
3406C Engines for Caterpillar Built Machines Engine Oil Pump
D250E Series II and D300E Series II Articulated Trucks Power Train Axle Shaft - Install
784C and 785C Off-Highway Truck/Tractors Steering System Solenoid and Relief Valve (Steering)
784C and 785C Off-Highway Trucks Machine Systems Solenoid Valve (Air Start) - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Pump Drive - Remove
784C and 785C Off-Highway Truck/Tractors Steering System Front Wheel - Align
784C and 785C Off-Highway Truck/Tractors Steering System Worksheets
583R Pipelayer Power Train Torque Divider - Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Alert Indicator - Troubleshoot
D250E Series II and D300E Series II Articulated Trucks Power Train Final Drive - Remove
793C Off-Highway Truck/Tractor Power Train Drive Shaft (Main) - Remove and Install
583R Pipelayer Power Train Transmission and Bevel Gears - Separate
784C and 785C Off-Highway Trucks Machine Systems Fuel Tank - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train Final Drive - Install
583R Pipelayer Power Train Track Roller - Remove
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Pulse Width Modulated (PWM) Sensor - Test