554 Forwarder and 574 Forwarder Caterpillar


Model View Illustrations

Usage:

554 1AM



Illustration 1g00887700

554 Forwarder

(1) Cab. (2) Implement Pump. (3) Power Train Pump. (4) Power Train Motor. (5) Power Train Oil Tank. (6) Fuel Tank. (7) Implement Oil Tank. (8) Rear Differential. (9) Engine. (10) Implement Oil Cooler. (11) Power Train Oil Cooler. (12) Front Drive Shaft. (13) Transmission Gearbox. (14) Center Drive Shaft. (15) Hitch Drive Shaft. (16) Brakes. (17) Rear Bogie (Left Side). (18) Radiator. (19) Battery Disconnect Switch and Secondary Disconnect Switch. (20) Front Differential. (21) Final Drive. (22) Front Bogie (Left Side).




Illustration 2g00887701

574 Forwarder (S/N: 1FM1-433)

(1) Cab. (2) Implement Pump. (3) Power Train Pump. (4) Power Train Motor. (5) Power Train Oil Tank. (6) Fuel Tank. (7) Implement Oil Tank. (8) Rear Drive Shaft. (9) Rear Differential. (10) Engine. (11) Implement Oil Cooler. (12) Power Train Oil Cooler. (13) Front Drive Shaft. (14) Transmission Gearbox. (15) Center Drive Shaft. (16) Hitch Drive Shaft. (17) Brakes. (18) Rear Bogie (Left Side). (19) Radiator. (20) Battery Disconnect Switch and Secondary Disconnect Switch. (21) Front Differential. (22) Final Drive. (23) Front Bogie (Left Side).




Illustration 3g00887607

574 Forwarder (S/N: 1FM434-UP)

(1) Cab. (2) Implement Pump. (3) Power Train Pump. (4) Power Train Motor. (5) Power Train Oil Tank. (6) Fuel Tank. (7) Implement Oil Tank. (8) Rear Drive Shaft. (9) Rear Differential. (10) Engine. (11) Implement Oil Cooler. (12) Power Train Oil Cooler. (13) Front Drive Shaft. (14) Transmission Gearbox. (15) Center Drive Shaft. (16) Hitch Drive Shaft. (17) Brakes. (18) Rear Bogie (Left Side). (19) Radiator. (20) Battery Disconnect Switch and Secondary Disconnect Switch. (21) Front Differential. (22) Final Drive. (23) Front Bogie (Left Side).




Illustration 4g00887703

(24) Operator Compartment. (25) Pillar Base. (26) Movable Gate. (27) Boom. (28) Stake. (29) Bank. (30) Engine Compartment. (31) Bogie Lift Cylinder (If Equipped). (32) Articulation and Oscillation Joint.




Illustration 5g00682987

Table 1
554 Forwarder    
Height of Cab (A)    
3720 mm (147 inch)    
Height of Log Loader (B) (Storage Position)    
3600 mm (142 inch)    
Overall Length (C)    
8638 mm (340 inch)    
Width    
2590 mm (102 inch)    
Weight    
12000 kg (26400 lb)    
Maximum Payload    
10000 kg (22000 lb)    

Table 2
574 Forwarder    
Height of Cab (A)    
3690 mm (145 inch)    
Height of Log Loader (B) (Storage Position)    
3800 mm (150 inch)    
Overall Length (C)    
9360 mm (368 inch)    
Width    
2830 mm (111 inch)    
Weight    
16000 kg (35200 lb)    
Maximum Payload    
14000 kg (30800 lb)    

Boom

Reach




Illustration 6g00891534

(33) Models F61 F72 and F71 F72

(34) Models F61 FT85, F71 FT85, and F71 FT100.

Table 3
Reach of Boom    
Models     Extendable Reach     Maximum Reach    
F61 F72
F71 F72    

1.4 m (4.6 ft)
(A)    

7.2 m (23.6 ft)
(B)    
F61 FT85
F71 F85    

2.65 m (8.7 ft)
(C)    

8.5 m (27.9 ft)
(D)    
F71 FT100    
4.2 m (13.8 ft)
(C)    

10 m (32.8 ft)
(D)    

Lifting Capacity

Table 4
Lifting Capacity of the Boom    
Models     Allowable Loads    

3 m (9.8 ft) Extension

4 m (13.1 ft) Extension    

5 m (16.4 ft) Extension    

6 m (19.7 ft) Extension    

7 m (23 ft) Extension    

8 m (26.2 ft) Extension    

8.4 m (27.6 ft) Extension    

10 m (32.8 ft) Extension    
F61 F72    
2160 kg (4762 lb)    

1680 kg (3704 lb)    

1380 kg (3042 lb)    

1150 kg (2535 lb)    

970 kg (2138 lb)    
N/A     N/A     N/A    
F61 FT85    
2030 kg (4475 lb)    

1570 kg (3461 lb)    

1280 kg (2822 lb)    

1060 kg (2337 lb)    

890 kg (1962 lb)    

760 kg (1675 lb)    

700 kg (1543 lb)    
N/A    

Table 5
Lifting Capacity of the Boom    
Models     Allowable Loads    

3 m (9.8 ft) Extension

4 m (13.1 ft) Extension    

5 m (16.4 ft) Extension    

6 m (19.7 ft) Extension    

7 m (23 ft) Extension    

8 m (26.2 ft) Extension    

9 m (29.5 ft) Extension    

10 m (32.8 ft) Extension    
F71 F72    
2370 kg (5225 lb)    

1860 kg (4100 lb)    

1530 kg (3373 lb)    

1270 kg (2800 lb)    

1080 kg (2381 lb)    
N/A     N/A     N/A    
F71 FT85    
2250 kg (4960 lb)    

1740 kg (3836 lb)    

1430 kg (3153 lb)    

1190 kg (2623 lb)    

1000 kg (2205 lb)    

860 kg (1896 lb)    
N/A     N/A    
F71 FT100    
2150 kg (4740 lb)    

1650 kg (3638 lb)    

1350 kg (2976 lb)    

1130 kg (2491 lb)    

950 kg (2094 lb)    

820 kg (1808 lb)    

700 kg (1543 lb)    

580 kg (1279 lb)    

Grapple




Illustration 7g00514024

Table 6
Specifications of the Grapple    
Model     FX25     FX35    
Weight    
160 kg (353 lb)    

170 kg (375 lb)    
Maximum Load    
4000 kg (8818 lb)    

4000 kg (8818 lb)    
Maximum Opening (A)    
1490 mm (58.6 inch)    

1575 mm (62.0 inch)    
Minimum Opening (B)    
90 mm (3.5 inch)    

108 mm (4.3 inch)    

Caterpillar Information System:

793C Off-Highway Truck Power Train Relief Valve (Torque Converter Outlet) - Remove and Install
980G Wheel Loader Machine Systems Piston Pump (Steering) - Disassemble
784C and 785C Off-Highway Truck/Tractors Steering System Metering Pump (Steering)
3406C Engines for Caterpillar Built Machines Engine Oil Pump
D250E Series II and D300E Series II Articulated Trucks Power Train Axle Shaft - Install
784C and 785C Off-Highway Truck/Tractors Steering System Solenoid and Relief Valve (Steering)
784C and 785C Off-Highway Trucks Machine Systems Solenoid Valve (Air Start) - Remove and Install
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Front Suspension (Cylinder) - Disassemble
583R Pipelayer Power Train Priority Valve
583R Pipelayer Power Train Transmission Oil Filter
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Pressure Control Valve (Transmission)
583R Pipelayer Power Train Transmission and Torque Converter Pump
980G Wheel Loader Power Train Output Transfer Gears - Assemble
784C and 785C Off-Highway Trucks Machine Systems Gear Pump (Torque Converter and Parking Brake Release) - Remove
784C and 785C Off-Highway Truck/Tractors Steering System Pressure Switches
583R Pipelayer Power Train Torque Converter Outlet Relief Valve - Install
3406E On-Highway Engine Piston Cooling Jets - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Pump Drive - Remove
784C and 785C Off-Highway Truck/Tractors Steering System Front Wheel - Align
784C and 785C Off-Highway Truck/Tractors Steering System Worksheets
583R Pipelayer Power Train Torque Divider - Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Alert Indicator - Troubleshoot
D250E Series II and D300E Series II Articulated Trucks Power Train Final Drive - Remove
793C Off-Highway Truck/Tractor Power Train Drive Shaft (Main) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.