CID 0822 FMI 05 Display Backlighting Current Below Normal - Test
This diagnostic code is recorded when the VIMS main module determines that there is an open circuit in the display back light return circuit.
- CHECK FOR OPEN BACKLIGHT BULBS.
- Check for open backlight bulbs in the message center and the bottom portion of the speedometer/tachometer module.
Expected results:Bulbs are good.
Results:
- OK - Bulbs are good. Proceed to Step 2.
- NOT OK - Bulbs are open. Replace the open bulbs.
- Check for open backlight bulbs in the message center and the bottom portion of the speedometer/tachometer module.
- CHECK FOR OPEN HARNESS
- Turn the key start switch and the disconnect switch to OFF position.
- Disconnect the VIMS main module and the message center back light from the machine harness.
- Measure the resistance of the display back light return circuit from the VIMS main module connector (contact 3) to the message center back light bulb socket (wire E710-BU(Blue)).
Expected results:There is continuity (less than 5 ohms).
Results:
- OK - Circuit has continuity. The display back light return circuit in the machine harness is correct. The VIMS main module has failed. Replace the VIMS module. Refer to the Testing and Adjusting, "Module-Replace" section. STOP.
- NOT OK - Circuit has NO continuity. The machine harness has failed. The display back light return circuit is open in the machine harness. Repair the machine harness or replace the machine harness. STOP.
Caterpillar Information System:
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0822 FMI 03 Display Backlighting Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0821 FMI 03 Display Power Supply Voltage Above Normal - Test
769D Off-Highway Truck and 771D Quarry Truck Stopping the Engine if an Electrical Malfunction Occurs
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0820 FMI 12 Keypad Data Link Failed - Test
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Belts
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0820 FMI 06 Keypad Data Link Current Above Normal - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Brake Accumulator - Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0820 FMI 03 Keypad Data Link Voltage Above Normal - Test
784C, 785C and 785C HAA Off-Highway Truck/Tractors Steering System Steering Gear
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Hoist Cylinder - Assemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0820 FMI 02 Keypad Data Link Incorrect - Test
3406C Engines for Caterpillar Built Machines Compression Brake - If Equipped
583R Pipelayer Power Train Transmission Hydraulic Control Valve - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0822 FMI 06 Display Backlighting Current Above Normal - Test
784C and 785C Off-Highway Trucks Machine Systems Gear Pump (Hoist and Rear Brake Cooling) - Remove
769D Off-Highway Truck and 771D Quarry Truck Breather (Torque Converter and Transmission) - Replace
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Motor Case Drain Pressure Test
3306C Engines for Caterpillar Built Machines Crankshaft Pulley
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Service Brake Control Valve - Remove and Install
583R Pipelayer Power Train Transmission Hydraulic Control Valve - Remove
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0341 FMI 03 Solenoid Valve (No. 4) (Warm Up) Voltage Above Normal - Test
554 Forwarder and 574 Forwarder Safety Signs and Labels
980G Wheel Loader Machine Systems Vane Pump (Implement) - Disassemble
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement V-Belts - Remove and Install