Water Directors - Remove and Install
拆卸步骤
开始:
- 拆卸间隔板。 请参考解体与组装, "间隔板 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 从缸盖上拆下导水器 (1) 。
Show/hide table
 | |
| 图 1 | g00481082 |
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 组装前彻底清洁缸盖。
- 将新的导水器 (1) 安装到缸盖中。 将导水器 (1) 上的缺口与缸盖上的 "V" 标记对准。
Show/hide table
| | |
| 图 2 | g00481082 |
- 将导水器 (1) 安装到低于缸盖表面 0.8 ± 0.6 mm (0.031 ± 0.023 in) 的深度。
End By: 安装间隔板。 请参考 解体与组装, "间隔板 - 拆卸和安装"。
Caterpillar Information System:
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Control
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Rear Suspension (Cylinder) - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Rear Suspension (Cylinder) - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Front Suspension (Cylinder) - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Front Suspension (Cylinder) - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Front Suspension (Cylinder) - Disassemble
69D and 769D Off-Highway Trucks and 771D Quarry Truck Hood (Rear) - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Lift Cylinder
AP-1000B and BG-260C Asphalt Pavers Machine Tiedown Information
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Lift Cylinder
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Front Suspension (Cylinder) - Assemble
3406C Engines for Caterpillar Built Machines Gear Group (Front)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Magnetic Switch (Prelubrication Relay) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Main Control Valve and Mounting Plate (Lift and Auxiliary) - Install
3304B and 3306B Engines for Caterpillar Built Machines Air Compressor - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Main Control Valve and Mounting Plate (Lift and Auxiliary) - Remove
515 Wheel Skidder and 525 Wheel Skidder Walk-Around Inspection
Electronic Modular Control Panel II (EMCP II) For MUI Engines Alarm Module or Remote Annunciator - Troubleshoot
69D and 769D Off-Highway Trucks and 771D Quarry Truck Unit Injector Hydraulic Pump Drive - Remove
980G Wheel Loader Braking System Parking Brake - Manual Release
D250E Series II and D300E Series II Articulated Trucks Machine Systems Hoist Control Valve - Assemble
980G Wheel Loader Braking System Parking Brake Control Cable - Adjust
24H Motor Grader Power Train Hydraulic Filter (Differential)
Repairing the Nonmetallic Fenders, Machine Hoods, and Tank Covers {1273, 7251, 7252} Repairing the Nonmetallic Fenders, Machine Hoods, and Tank Covers {1273, 7251, 7252}