IT14G Integrated Toolcarrier Caterpillar

1. Weight and instructions are listed herein. This information is applicable to units that are manufactured by Caterpillar.

   The 914G Wheel Loader weighs 8076 kg (17805 lb).

   Note: Weights may vary with different attachments.

2. For lifting objects, use properly rated cables and properly rated slings. Position the crane for a level machine lift.

3. Spreader bar widths should be sufficient for preventing contact with the machine.

Show/hide table



Illustration 1	g00475586
Front Lifting and Tying Down Points

Show/hide table



Illustration 2	g00475587
Rear Lifting and Tying Down Points

4. Two rear holes and two front holes are provided for tie-downs. Use these holes when you are tying down the machine.

Install the tie-downs at several locations. Place blocks under the front wheels and under the rear wheels.

Check the appropriate laws that govern the weight of the load. Check the appropriate laws that govern the width of the load and the length of the load.

Consult your Caterpillar dealer for shipping instructions for your machine.