Engine Oil Level - Check
Show/hide table
 |
|
Personal injury or death can occur if personnel are trapped between the wheel and the frame. The steering system is hydraulically controlled and wheels can crush personnel during movement. Use caution when working between the wheels and the frame. If the wheels must be turned, ensure that all personnel are clear of the machine before any movement. |
Show/hide table
| NOTICE |
|---|
|
Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage. |
- The machine must be on a level surface and the parking brake must be engaged.
- When the engine is running at low idle, maintain the oil level between the "ADD" mark and the "FULL" mark. These marks are on the "LOW IDLE" side of dipstick (2).
- When the engine is stopped, maintain the oil level between the "ADD" mark and the "FULL" mark. These marks are on the "ENGINE STOPPED" side of dipstick (2).
- If necessary, remove oil filler cap (1) and add oil.
- Clean oil filler cap (1) and install oil filler cap (1).
Show/hide table
| |
| Illustration 1 | g00441363 |
|
Location of the dipstick and the oil filler cap for the engine | |
Show/hide table
| |
| Illustration 2 | g00408911 |
|
(1) Oil filler cap
(2) Dipstick | |
Caterpillar Information System:
785C HAA Off-Highway Truck Engine Air Filter Service Indicator - Inspect
966G and 972G Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Install
966G and 972G Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Remove
3126B Engine for Caterpillar Built Machines Cylinder Head
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
928G Wheel Loader Steering Cylinder Bearings - Lubricate
966G and 972G Wheel Loaders Power Train Relief Valve (Torque Converter Outlet) - Assemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Brake System Air - Purge
928G Wheel Loader Drive Shaft Spline (Center) - Lubricate
966G and 972G Wheel Loaders Power Train Relief Valve (Torque Converter Outlet) - Disassemble
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train NoSPIN Differential
785C HAA Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
785C HAA Off-Highway Truck Engine Oil and Filter - Change
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Cylinder - Remove
793B Off-Highway Truck Front Axle Breather - Replace
784C and 785C Off-Highway Truck/Tractors Front Wheel Oil - Change
527 Track-Type Skidder Track Roller Frame Guides - Inspect
785C HAA Off-Highway Truck Ether Starting Aid Cylinder - Replace
784C and 785C Off-Highway Truck/Tractors Hoist, Torque Converter and Brake Tank Oil - Change
517 Track-Type Skidder Track Roller Frame - Inspect
784C and 785C Off-Highway Truck/Tractors Hoist, Torque Converter and Brake Tank Oil Level - Check
793B Off-Highway Truck Magnetic Plug (Wheels) - Check
784C and 785C Off-Highway Truck/Tractors Parking Brake Release Oil Filter - Replace
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Hydraulic Oil Flow