Steering Cylinder Bearings - Lubricate
Wipe all grease fittings before you apply any lubricant to the grease fittings.
Show/hide table
 | |
| Illustration 1 | g00101952 |
Right side steering cylinder | |
Apply lubricant to the grease fitting (1) for the head end of the steering cylinder. Apply lubricant to the remote grease fitting (2) for the rod end of the steering cylinder.
Show/hide table
 | |
| Illustration 2 | g00440469 |
Left side steering cylinder | |
Apply lubricant to the grease fitting (3) for the head end of the steering cylinder. Apply lubricant to the remote grease fitting (4) for the rod end of the steering cylinder.
Caterpillar Information System:
966G and 972G Wheel Loaders Power Train Relief Valve (Torque Converter Outlet) - Assemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Brake System Air - Purge
928G Wheel Loader Drive Shaft Spline (Center) - Lubricate
966G and 972G Wheel Loaders Power Train Relief Valve (Torque Converter Outlet) - Disassemble
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train NoSPIN Differential
785C HAA Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
784C and 785C Off-Highway Truck/Tractors Drive Shaft Slip Joint - Lubricate
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Vibratory Support Oil Sample - Obtain
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Vibratory Support Oil Level - Check
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Vibratory Support Oil - Change
966G and 972G Wheel Loaders Power Train Transmission Oil Pump - Assemble
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Limited Slip Differential Disc End Play Check - Check
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
3126B Engine for Caterpillar Built Machines Cylinder Head
966G and 972G Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Remove
966G and 972G Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Install
785C HAA Off-Highway Truck Engine Air Filter Service Indicator - Inspect
785C HAA Off-Highway Truck Engine Oil Level - Check
785C HAA Off-Highway Truck Engine Oil and Filter - Change
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Cylinder - Remove
793B Off-Highway Truck Front Axle Breather - Replace
784C and 785C Off-Highway Truck/Tractors Front Wheel Oil - Change
527 Track-Type Skidder Track Roller Frame Guides - Inspect
785C HAA Off-Highway Truck Ether Starting Aid Cylinder - Replace