966G and 972G Wheel Loaders Power Train Caterpillar


Relief Valve (Transmission Hydraulic Control) - Remove

Usage:

972G 1EW

Removal Procedure

Start By:

  1. Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".

  1. Open the engine hood. The transmission hydraulic control relief valve is located on the left side of the torque converter housing.


    Illustration 1g00440984

  2. Remove four bolts (1) and transmission hydraulic control relief valve (2).


    Illustration 2g00440986

  3. Remove torque converter inlet relief valve (3). Remove O-ring seal (4) from torque converter inlet relief valve (3).

Caterpillar Information System:

3126B Engine for Caterpillar Built Machines Cylinder Head
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
928G Wheel Loader Steering Cylinder Bearings - Lubricate
966G and 972G Wheel Loaders Power Train Relief Valve (Torque Converter Outlet) - Assemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Brake System Air - Purge
928G Wheel Loader Drive Shaft Spline (Center) - Lubricate
966G and 972G Wheel Loaders Power Train Relief Valve (Torque Converter Outlet) - Disassemble
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train NoSPIN Differential
785C HAA Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
784C and 785C Off-Highway Truck/Tractors Drive Shaft Slip Joint - Lubricate
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Vibratory Support Oil Sample - Obtain
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Vibratory Support Oil Level - Check
966G and 972G Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Install
785C HAA Off-Highway Truck Engine Air Filter Service Indicator - Inspect
785C HAA Off-Highway Truck Engine Oil Level - Check
785C HAA Off-Highway Truck Engine Oil and Filter - Change
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Cylinder - Remove
793B Off-Highway Truck Front Axle Breather - Replace
784C and 785C Off-Highway Truck/Tractors Front Wheel Oil - Change
527 Track-Type Skidder Track Roller Frame Guides - Inspect
785C HAA Off-Highway Truck Ether Starting Aid Cylinder - Replace
784C and 785C Off-Highway Truck/Tractors Hoist, Torque Converter and Brake Tank Oil - Change
517 Track-Type Skidder Track Roller Frame - Inspect
784C and 785C Off-Highway Truck/Tractors Hoist, Torque Converter and Brake Tank Oil Level - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.