Coupler Cylinder - Assemble
Assembly Procedure
- Install piston (8) onto rod assembly (4) .
Note: Perform the following procedure for both rods.
Show/hide table
Illustration 1 | g00432162 |
- Install nut (10) and tighten nut (10) to a torque of 68 ± 7 N·m (50 ± 5 lb ft). Install cotter pin (9) .
- Install head assembly (6) onto rod assembly (4) .
- Install new seals (5) and (7) onto the head assembly (6) and piston (8) .
- Insert rod assembly (4) into the cylinder.
Show/hide table
Illustration 2 | g00432161 |
Show/hide table
Illustration 3 | g00432160 |
- Install retaining ring (3), ring (2) and retaining ring (1) inside the cylinder.
End By: Install the quick coupler. Refer to Disassembly and Assembly, "Quick Coupler - Remove and Install".
Caterpillar Information System:
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Steering Neutralizer Valve
65E, 75E, 85E and 95E Agricultural Tractors S·O·S Oil Analysis
924Gz Wheel Loader Parking Brake Control
IT14G Integrated Toolcarrier Material Handling Arm Rated Load
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Coupler Cylinder - Disassemble
65E, 75E, 85E and 95E Agricultural Tractors Cold Weather Lubricants
65E, 75E, 85E and 95E Agricultural Tractors Lubricating Grease
517 Track-Type Skidder Power Train Torque Converter
65E, 75E, 85E and 95E Agricultural Tractors Aftermarket Oil Additives
65E, 75E, 85E and 95E Agricultural Tractors Re-refined Base Stock Oils
966G Wheel Loader and 972G Wheel Loader Power Train Torque Converter and Pump Drive Housing
789C Off-Highway Truck Steering System Steering Accumulator
517 Track-Type Skidder Power Train Transmission and Torque Converter Pump
928G Wheel Loader Stopping the Engine
561M Pipelayer Resonator Assembly
924Gz Wheel Loader Stopping the Machine
517 Track-Type Skidder Power Train Transmission Oil Filter
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Braking System Troubleshooting
CP-563D, CS-563D and CS-583D Vibratory Compactors Leveling Blade Control Valve
572R Pipelayer Lifting Capacities
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Seat - Remove and Install
517 Track-Type Skidder Power Train Transmission - Power Shift
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Housing (Front)
517 Track-Type Skidder Power Train Bevel and Transfer Gears