 |
Failure to comply to the rated load can cause possible personal injury or attachment damage. Review the rated load of a particular attachment before performing any operation. Make adjustments to the rated load as necessary. |
 |
Note: Rated loads should be used as a guide. Attachments, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.
The rated operating load is defined by the least amount of weight of the following conditions.
- 50 percent of the full turn static tipping load
- The minimum lift capacity
- The minimum tilt capacity
The placement height (ground line to the chain hook) and reach (front tire to the chain hook) are given for the highest position of the material handling arm. The placement height (ground line to the chain hook) and reach (front tire to the chain hook) are given for the lowest position of the material handling arm.
 | |
| Illustration 1 | g00432306 |
Position (A) represents the retracted position. Position (B) represents the mid-position. Position (C) represents the extended position. | |
The following table provides the rated operating loads for the standard machine configuration with material handling arm.
| RATED LOAD FOR AN IT14G THAT IS EQUIPPED WITH A 9V-1795 MATERIAL HANDLING ARM | |||
|---|---|---|---|
| Position of Material Handling Arm | Retracted A |
Mid-Position B |
Extended C |
| Rated Operating Load | 1332 kg (2937 lb) |
1046 kg (2306 lb) |
863 kg (1902 lb) |
| Placement Height at Lowest Position | -1872 mm (-6 ft 1 inch) |
-2669 mm (-8 ft 9 inches) |
-3467 mm (-11 ft 4 inches) |
| Reach at Lowest Position | 1514 mm (5 ft) |
2116 mm (6 ft 11 inches) |
2719 mm (8 ft 11 inches) |
| Placement Height at Highest Position | 5187 mm (17 ft) |
6014 mm (19 ft 9 inches) |
6842 mm (22 ft 5 inches) |
| Reach at Highest Position | 1402 mm (4 ft 7 inches) |
1962 mm (6 ft 5 inches) |
2522 mm (8 ft 3 inches) |